Difference between revisions of "Message Control"

From exigoWiki
Jump to navigation Jump to search
(→‎Assign to button)
(→‎Configuration)
 
(45 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
[[File:Message Control 1.JPG |thumb|600px|Message Control]]
 
[[File:Message Control 1.JPG |thumb|600px|Message Control]]
−
Message Control is used to dispatch prerecorded messages.<br>
+
'''Message Control''' is used to dispatch prerecorded messages in the system.<br>
 
This can be done from:
 
This can be done from:
 
* Access Panels
 
* Access Panels
−
* Inputs on Controller or ENA amplifier
+
* Control Inputs on Controller or ENA amplifier
  
 +
Prerecorded messages must be defined and [[Upload Audio Messages|'''uploaded''']] to the System Controller.<br>
 +
Messages may be added and removed as required by the customer.
  
−
==Assign to button==
+
== Configuration ==
 
Before using this function a message (.wav file) needs to be uploaded to the controller.
 
Before using this function a message (.wav file) needs to be uploaded to the controller.
 +
* Drag-and-drop '''Message Control''' to:
 +
:'''Amplifier''' > '''Control Inputs''' > '''CI_1-CI_6'''<br>
 +
or <br>
 +
:'''Access Panel''' > '''Programmable Keys''' > '''p1-px'''
  
−
[[File:Message Control 2.JPG|thumb|left|700px|Assigning Message Control to a button]]
+
[[File:Message Control 2.png|thumb|left|700px|Assigning Message Control to a button]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
−
Assigning '''Message Control''' to a button:
+
== Organizing messages ==
−
* Drag '''Message Control''' to the «press_action» on the desired key
+
When the prerecorded messages are uploaded to the controller they may be organized in '''Exigo Management Tool (EMT)'''.
−
* Set Repetitions or activate Loop until stopped
 
−
* Optional Chime in front of the message
 
−
* If '''Destination''' is empty, one can use «Zone Selection» buttons to choose were to distribute the message
 
  
 +
=== Renaming Messages ===
 +
For easy identification of the messages they can be renamed to a more logical name. <br>
 +
Renaming messages:
 +
* In '''System > Messages''':
 +
* Select the Message you want to rename.
 +
* Type in a new name in the '''Name''' field and press '''Done'''.
  
 +
[[File:Message Control 3.JPG|thumb|left|700px|Organizing Messages]]
 +
<br style="clear:both;" />
  
−
{| class="wikitable"
+
It is also possible to add or delete messages in the system.
−
!colspan="6"|Parameters
+
* Press the '''Add''' or '''Delete''' button (top right in Message) to add or delete a message.
−
|-
 
−
|Destination
 
−
|Description of this field.
 
−
|-
 
−
|Priority
 
−
|Description of another field.
 
−
|}
 
  
−
==Dak button==
+
== Parameter details ==
−
What happens if button is pressed
 
  
−
===Leds===
+
[[File:Message_Control_4.png|thumb|left|500px|Parameter details]]
−
What does the leds indicate.
+
<br style="clear:both;" />
  
−
==Use cases:==
+
'''<u>Source</u>''' <br>
−
===Case 1: Use case title===
+
The Message that should be broadcast.
−
Simple use case
 
  
−
{| class="wikitable"
+
'''<u>Activation</u>''' <br>
−
!colspan="6"|Parameters
+
Start, Stop or Toggle the message broadcast.
−
|-
 
−
|Destination
 
−
|What is this set too
 
−
|-
 
−
|Priority
 
−
|Lorum ipsum
 
−
|}
 
  
−
Description of what this solves.
+
'''<u>Destination</u>''' <br>
 +
The Zone(s) that will receive the message. Can be left blank if access panel keys are used for zone selection.
  
−
=== Case 2: More use cases===
+
'''<u>Repetitions</u>''' <br>
−
In this case the button was used to indicate that there was activity in zone 4 or zone 5.
+
The number of times the message will be repeated. Check the '''Loop''' box for continuous playback.
  
−
{| class="wikitable"
+
'''<u>Priority</u>''' <br>
−
!colspan="6"|Parameters
+
The priority of the broadcast. Check the '''Replace''' box to make this message replace other messages with the same priority. If the box is not checked, messages with the same priority will be shown as busy. <br>
−
|-
+
Default Priority = 50.
−
|Destination
 
−
|What is this set too
 
−
|-
 
−
|Priority
 
−
|Lorum ipsum
 
−
|}
 
  
−
Description of what this solves.
+
'''<u>Chime</u>''' <br>
 +
The chime sound that will be played before the message starts.
  
−
=== Case xx: Additional use cases===
+
== Advanced Options ==
−
In this case the button was used to indicate that there was activity in zone 4 or zone 5.
+
* Check the '''Use Default Parameters''' box to use default values for the parameters
 +
'''<u>Is Alarm</u>'''<br>
 +
When set the call is of type alarm. System will enter Alarm state, 'on_alarm' state of other calls will be activated.<br>
 +
Event "alarm tone" will be sent for start and stop of the message, allowing GPOs to use follow alarm during release delay operation.
  
−
{| class="wikitable"
+
'''<u>Volume</u>'''<br>
−
!colspan="6"|Parameters
+
: The Volume range is from -40 to +6 decibels.
−
|-
 
−
|Destination
 
−
|What is this set too
 
−
|-
 
−
|Priority
 
−
|Lorum ipsum
 
−
|}
 
  
−
Description of what this solves
+
'''<u>Override pre-selected Zones by Zone Select</u>'''<br>
 +
Check the '''Override pre-selected Zones by Zone Select''' box to use dynamic destinations.
 +
:- This will also override the static destination list if defined.
 +
 
 +
'''<u>Always Include</u>'''<br>
 +
This is used together with dynamic zone selection to ensure that some critical zones are always part of the audio activity regardless of zone selection.<br>
 +
* '''Auto Select''' selected - the call will start regardless if a zone selection button is pressed or not.<br>
 +
* '''Auto Select''' not selected - if a zone selection button is not pressed, the call will not start.
 +
 
 +
'''<u>On Busy</u>'''<br>
 +
When one or more destination zones are busy with higher priority broadcasts, the following options are available:
 +
: '''Reject''' - Reject the broadcast
 +
: '''Go Partial''' - Run the broadcast now on free zones
 +
: '''Queue''' - Put the broadcast in queue and run when all zones are free
 +
If no value is chosen, a default value is used.
 +
* For input actions Program Activation, Message, the default value is Go Partial.
 +
* For input action Live Speech, the default value is Reject.
 +
 
 +
'''<u>On Interrupt</u>'''<br>
 +
When a broadcast is interrupted by a higher priority broadcast, the following options are available:
 +
: '''Cancel''' - Cancel the broadcast
 +
: '''Mute''' - Mute the broadcast in interrupted zones while a higher priority broadcast is running
 +
: '''Mute All''' - Mute the broadcast in all zones when interrupted 
 +
* For input actions such as Program Activation, Message, Live Speech, the default value is Mute.
 +
 
 +
'''<u>Release Delay</u>'''<br>
 +
Time in seconds (0, 20 s) before the zones and resources are released after the broadcast has ended.
 +
 
 +
'''<u>Escalation ID</u>'''<br>
 +
ID used if the escalation function will be used to change parameters of this call. It is possible to add multiple ID's.
  
 
== Availability ==
 
== Availability ==
 
This function is available on Exigo 1.2 and newer.
 
This function is available on Exigo 1.2 and newer.
−
 
−
[[Category:Template]]
 
−
 
  
 
[[Category:Exigo features]]
 
[[Category:Exigo features]]
 
[[Category:Input Actions]]
 
[[Category:Input Actions]]

Latest revision as of 14:04, 3 January 2020

Message Control

Message Control is used to dispatch prerecorded messages in the system.
This can be done from:

  • Access Panels
  • Control Inputs on Controller or ENA amplifier

Prerecorded messages must be defined and uploaded to the System Controller.
Messages may be added and removed as required by the customer.

Configuration

Before using this function a message (.wav file) needs to be uploaded to the controller.

  • Drag-and-drop Message Control to:
Amplifier > Control Inputs > CI_1-CI_6

or

Access Panel > Programmable Keys > p1-px
Assigning Message Control to a button


Organizing messages

When the prerecorded messages are uploaded to the controller they may be organized in Exigo Management Tool (EMT).

Renaming Messages

For easy identification of the messages they can be renamed to a more logical name.
Renaming messages:

  • In System > Messages:
  • Select the Message you want to rename.
  • Type in a new name in the Name field and press Done.
Organizing Messages


It is also possible to add or delete messages in the system.

  • Press the Add or Delete button (top right in Message) to add or delete a message.

Parameter details

Parameter details


Source
The Message that should be broadcast.

Activation
Start, Stop or Toggle the message broadcast.

Destination
The Zone(s) that will receive the message. Can be left blank if access panel keys are used for zone selection.

Repetitions
The number of times the message will be repeated. Check the Loop box for continuous playback.

Priority
The priority of the broadcast. Check the Replace box to make this message replace other messages with the same priority. If the box is not checked, messages with the same priority will be shown as busy.
Default Priority = 50.

Chime
The chime sound that will be played before the message starts.

Advanced Options

  • Check the Use Default Parameters box to use default values for the parameters

Is Alarm
When set the call is of type alarm. System will enter Alarm state, 'on_alarm' state of other calls will be activated.
Event "alarm tone" will be sent for start and stop of the message, allowing GPOs to use follow alarm during release delay operation.

Volume

The Volume range is from -40 to +6 decibels.

Override pre-selected Zones by Zone Select
Check the Override pre-selected Zones by Zone Select box to use dynamic destinations.

- This will also override the static destination list if defined.

Always Include
This is used together with dynamic zone selection to ensure that some critical zones are always part of the audio activity regardless of zone selection.

  • Auto Select selected - the call will start regardless if a zone selection button is pressed or not.
  • Auto Select not selected - if a zone selection button is not pressed, the call will not start.

On Busy
When one or more destination zones are busy with higher priority broadcasts, the following options are available:

Reject - Reject the broadcast
Go Partial - Run the broadcast now on free zones
Queue - Put the broadcast in queue and run when all zones are free

If no value is chosen, a default value is used.

  • For input actions Program Activation, Message, the default value is Go Partial.
  • For input action Live Speech, the default value is Reject.

On Interrupt
When a broadcast is interrupted by a higher priority broadcast, the following options are available:

Cancel - Cancel the broadcast
Mute - Mute the broadcast in interrupted zones while a higher priority broadcast is running
Mute All - Mute the broadcast in all zones when interrupted
  • For input actions such as Program Activation, Message, Live Speech, the default value is Mute.

Release Delay
Time in seconds (0, 20 s) before the zones and resources are released after the broadcast has ended.

Escalation ID
ID used if the escalation function will be used to change parameters of this call. It is possible to add multiple ID's.

Availability

This function is available on Exigo 1.2 and newer.

Retrieved from "https://exigo.zenitel.com/w/index.php?title=Message_Control&oldid=17119"