Difference between revisions of "IP Configuration"
Jump to navigation
Jump to search
(Tag: Visual edit) |
(Tag: Visual edit) |
||
Line 23: | Line 23: | ||
== Secondary System Controller == | == Secondary System Controller == | ||
To configure the IP setting for the Secondary System Controller: | To configure the IP setting for the Secondary System Controller: | ||
− | * Connect a PC to either Eth1 or Eth2 on [[ESC1 | ESC1]] | + | * Connect a PC to either Eth1 or Eth2 ports on [[ESC1 | ESC1]] |
− | * Log on to SSC with a | + | * Log on to SSC with a web browser |
− | * Navigate to '''Station Main''' | + | * Navigate to '''Station Main''' > '''Main Settings''' |
[[File:Secondary Controller Settings 1.png|thumb|left|600px|Web interface for the Secondary System Controller]] | [[File:Secondary Controller Settings 1.png|thumb|left|600px|Web interface for the Secondary System Controller]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
− | * Set IP address of the Primary System Controller | + | * '''Domain Controller IP''': Set IP address of the Primary System Controller |
− | * Set the Directory Number | + | * '''Directory Number''': Set the Directory Number |
− | * Set the IP Address of the SSC | + | * '''IP-address''': Set the IP Address of the SSC |
− | * Set the default Gateway. A good practice is to set the default Gateway to: x.x.x.1. | + | * '''Gateway''': Set the default Gateway. A good practice is to set the default Gateway to: x.x.x.1. |
− | == Exigo | + | == Exigo Devices (Amplifiers, Panels and Kits) == |
To configure the IP setting for Exigo devices: | To configure the IP setting for Exigo devices: | ||
− | * Log on to the device with a | + | * Log on to the device with a web browser |
− | * Navigate to '''Station Main''' | + | * Navigate to '''Station Main''' > '''Main Settings''' |
[[File:ECPIR_Settings_1.JPG|thumb|left|500px|Web Interface for the ECPIR-3P]] | [[File:ECPIR_Settings_1.JPG|thumb|left|500px|Web Interface for the ECPIR-3P]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
− | * Set IP address of the Primary System Controller | + | * '''Domain Controller IP''': Set IP address of the Primary System Controller |
− | * Set the Directory Number | + | * '''Directory Number''': Set the Directory Number |
− | * Set the IP Address of the | + | * '''IP-address''': Set the IP Address of the device |
− | * Set the default Gateway. A good practice is to set the default Gateway to: x.x.x.1. | + | * '''Gateway''': Set the default Gateway. A good practice is to set the default Gateway to: x.x.x.1. |
[[Category:Troubleshooting]] | [[Category:Troubleshooting]] | ||
[[Category:Exigo features]] | [[Category:Exigo features]] | ||
[[Category:Getting started]] | [[Category:Getting started]] |
Revision as of 15:57, 16 March 2017
This article describes how to configure the IP settings in Exigo.
Initially all devices must be configured with:
- Own IP address
- IP Address of Primary System Controller
- ID number (Directory Number)
- Default Gateway
Creating a table with relevant information is considered good practice.
Primary System Controller
To set the IP address for the Primary System Controller:
- Open the front cover on the ESC1.
- Connect a PC to the service port (npe_eth0). This has 169.254.1.5 as the default IP address.
- Log on with a web browser (Username=admin / Password=alphaadmin)
- Navigate to System Configuration > Interfaces
- Set the desired IP Address of the Primary System Controller (npe_eth1)
Secondary System Controller
To configure the IP setting for the Secondary System Controller:
- Connect a PC to either Eth1 or Eth2 ports on ESC1
- Log on to SSC with a web browser
- Navigate to Station Main > Main Settings
- Domain Controller IP: Set IP address of the Primary System Controller
- Directory Number: Set the Directory Number
- IP-address: Set the IP Address of the SSC
- Gateway: Set the default Gateway. A good practice is to set the default Gateway to: x.x.x.1.
Exigo Devices (Amplifiers, Panels and Kits)
To configure the IP setting for Exigo devices:
- Log on to the device with a web browser
- Navigate to Station Main > Main Settings
- Domain Controller IP: Set IP address of the Primary System Controller
- Directory Number: Set the Directory Number
- IP-address: Set the IP Address of the device
- Gateway: Set the default Gateway. A good practice is to set the default Gateway to: x.x.x.1.