Audio Program Control

Audio Program distribution

The Audio Program feature is used to distribute background music from external radio, MP3 player etc. to loudspeaker zone(s).

The background music can be turned on or off from an Access Panel or from a Control Input.

Connection of Audio Program Source

The analog audio source can be connected to «Line-In» of either:

• ESC System Controller
• ENA Amplifier
• TFIE-kit

Assign an Audio Program Source to a Line Input

An Audio Line Input can be used for several purposes, Audio Program is one of them. From the EMT tool you must dedicate a Line Input for Audio Program distribution:

1. In Components view, open External Connections
2. In System, identify the Controller, the Amplifer or the TKIE-kit to be used as Audio Program source, and expand to Audio Lines > Line Input
3. Drag «Audio Program Source» to the «Line Input»
4. A dialog box appears - select the Program channel number. If there are several audio program sources, you would normally start with program 1 and upwards.

Assigning an Audio Program Source to the input of the ESC Controller

Configuration

Controlling background music from an Access Panel

1. Drag Audio Program Control to the press_action on the desired key
2. Select the Source program and the Destination zones
3. Choose Activation by Toggle or Start/Stop

Button 6 will toggle Program 2 on and off to zones 2 and 4

Note: If «Destination» is empty, one can use «Zone Selection» buttons to dynamically choose were to distribute the background music

Controlling background music from a Control Input

Background music can be sent to predefined zones when an input is activated. When deactivated, the music can be turned off.

Background music ON:

1. Drag Audio Program Control to the on_action on the desired Control Input
2. Select the Source program and the Destination zones
3. Choose Activation by Start

Button 6 will toggle Program 2 on and off to zones 2 and 4

Note: If «Destination» is empty, one can use «Zone Selection» buttons to dynamically choose were to distribute the background music

• Drag-and-drop Input Actions -> Audio Program Control to:

Amplifier -> Control Inputs -> CI -> CI_1-CI_6 -> on_action/off_action

Source
The program that will be used.

Activation
Start, Stop or Toggle the broadcast.

Destination
The Zone(s) that will receive the broadcast. This may be left blank if access panel keys are used for zone selection.

Priority
The priority of the broadcast. Check the Replace box to make this broadcast replace other broadcasts with the same priority. If the box is not checked, broadcasts with the same priority will be shown as busy.

Chime
The chime sound that will be played before the broadcast starts.