Difference between revisions of "AGA Board"
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
* 600 ohms 0dB galvanic isolated input via transformers | * 600 ohms 0dB galvanic isolated input via transformers | ||
* Individually adjustable sensitivity (gain) for all channels (100mV to 1V) | * Individually adjustable sensitivity (gain) for all channels (100mV to 1V) | ||
| + | |||
| + | == Installation == | ||
| + | See [[ESC1]] for details on installation of the AGA board. | ||
== Configuration == | == Configuration == | ||
Revision as of 09:47, 4 April 2017
The AGA board is a general purpose audio interface for program feeding.
The Exigo ESC1 Controller has room for one AGA board inside.
This will provide the controller with maximum 12 optional analog inputs.
Features:
- 600 ohms 0dB galvanic isolated input via transformers
- Individually adjustable sensitivity (gain) for all channels (100mV to 1V)
Installation
See ESC1 for details on installation of the AGA board.
Configuration
To add the AGA board to the configuration:
- Switch to Components view
- The AGA board can be found under Devices -> Kits and Accessories
- Simply drag the AGA board on top of the ESC1 Controller in the device tree
The 12 analog input lines in the AGA board:
- System -> ESC1 -> Audio Lines -> AGA Lines
File:AGA board config 2.jpg
EMT - AGA Lines
The AGA Lines can now be configured the same way as other analog audio inputs in the system:
Audio Program Control
Additional documentation
For more documentation, please visit the Zenitel web page: https://www.zenitel.com/product/general-purpose-audio-interface
Availability
AGA board support is available on Exigo 1.3.3 and newer.
