Difference between revisions of "Audio Program Control"
(→Controlling background music from an Access Panel) |
(→Configuration) |
||
| Line 28: | Line 28: | ||
#Select the Source program and the Destination zones | #Select the Source program and the Destination zones | ||
#Choose Activation by «'''Toggle'''» or «'''Start/Stop'''» | #Choose Activation by «'''Toggle'''» or «'''Start/Stop'''» | ||
| + | |||
| + | File:Audio Program accesspanel.PNG | ||
| + | |||
Note: If «'''Destination'''» is empty, one can use «'''Zone Selection'''» buttons to dynamically choose were to distribute the background music | Note: If «'''Destination'''» is empty, one can use «'''Zone Selection'''» buttons to dynamically choose were to distribute the background music | ||
Revision as of 15:17, 27 June 2016
The Audio Program feature is used to distribute background music from external radio, MP3 player etc. to loudspeaker zone(s).
The background music can be turned on or off from an Access Panel or from a Control Input.
Contents
Connection of Audio Program Source
The analog audio source can be connected to «Line-In» of either:
- ESC System Controller
- ENA Amplifier
- TFIE-kit
Assign an Audio Program Source to a Line Input
An Audio Line Input can be used for several purposes, Audio Program is one of them. From the EMT tool you must dedicate a Line Input for Audio Program distribution:
- In Components view, open External Connections
- In System, identify the Controller, the Amplifer or the TKIE-kit to be used as Audio Program source, and expand to Audio Lines > Line Input
- Drag «Audio Program Source» to the «Line Input»
- A dialog box appears - select the Program channel number. If there are several audio program sources, you normallty will start with program1 and upwards.
Configuration
Controlling background music from an Access Panel
- Drag «Audio Program Control» to the «press_action» on the desired key
- Select the Source program and the Destination zones
- Choose Activation by «Toggle» or «Start/Stop»
File:Audio Program accesspanel.PNG
Note: If «Destination» is empty, one can use «Zone Selection» buttons to dynamically choose were to distribute the background music
Access Panel -> Programmable Keys -> Key -> p1-px -> press_action/release_action
Controlling background music from a Control Input
- Drag-and-drop Input Actions -> Audio Program Control to:
Amplifier -> Control Inputs -> CI -> CI_1-CI_6 -> on_action/off_action
Source
The program that will be used.
Activation
Start, Stop or Toggle the broadcast.
Destination
The Zone(s) that will receive the broadcast. This may be left blank if access panel keys are used for zone selection.
Priority
The priority of the broadcast. Check the Replace box to make this broadcast replace other broadcasts with the same priority. If the box is not checked, broadcasts with the same priority will be shown as busy.
Chime
The chime sound that will be played before the broadcast starts.
