Main Page

Welcome to ExigoWiki everything you need to know about VINGTOR-STENTOFON Exigo. 149 articles in English

Hardware Getting started Software upgrade

Features Input Actions Output Actions

EMT Integration Troubleshooting

How-To Release notes AlphaWiki

Wiki User's Guide

Software download

All categories

Exigo Exigo is an IP based PAGA system designed to meet the robust and high availability requirements in both onshore and offshore critical applications. As an IP system, Exigo has a wide range of possibilities when it comes to integration. An audio system can integrate with Exigo using open standards such as SIP, while monitoring can be done remotely with industry standard SNMP solutions. In addition, a high level of custom integration can be done using the SDK/API directly on the Exigo system where all information such as fault status and activity is available. Analog integration to UHF or legacy audio PABX systems is also possible using the wide range of control inputs/outputs and audio inputs available in the system. The same inputs can also be used to integrate high quality music solutions to Exigo for the distribution of background music. The Exigo system is easily configurable and scalable after installation. What's new SOFTWARE Exigo 1.4.3.0 Released (12.2018) This release includes important bug fixes, as well as new features. Exigo 1.4.3.0 is available on the download page This release adds support for the following: ENA2100-AC support IP-LCM support Pulse integration supported Line input forwarding supported on all devices For a complete list of bug fixes and functional changes and enhancements in Exigo 1.4.3.0 , see Exigo Release Notes How to upgrade: Exigo software upgrade procedure

Important notices ENA2xxx Shutdown Fix (4.2018) An issue has been observed on Exigo-1.3.3.0 on ENA2200 and ENA2400 where audio channels goes in shutdown mode when playing audio with low frequencies. To prevent this, a filter needs to be added to the channels to protect it from the very lowest frequencies. More information here. EMT - Exigo Management Tool EMT is the configuration tool for the Exigo system. The EMT runs on a Windows computer, and gives the facility to program the features of the system off-line, and at a later stage download this programming into the system. The latest version of EMT is available on the download page. AlphaCom Integration The Exigo-AlphaCom integration allows audio to be sent from Exigo to AlphaCom and vice versa. AlphaCom can be integrated with different external systems using SIP trunks such as: Voice Gateways (Analog, GSM, ISDN) SIP iPABX Call Managers Asterisk Software PBX Tetra Radio Systems Hence, through AlphaCom integration, Exigo can be connected to a wide variety of systems. The Exigo-AlphaCom integraton is available in Exigo 1.3. EN54-16 Certified The EN54 Fire detection and fire alarm systems is a mandatory standard that specifies requirements and laboratory test for every component of fire detection and fire alarm system. EN54 allows the free movement of construction products between countries of the European Union market. EN54 was developed and approved by European Committee for Standardization (CEN, French: Comité Européen de Normalisation). This standard is widely recognized around the world for several countries outside of European Union. It is recognized in Latin American countries, Brasil, African and Asian countries and several islands in the Pacific Ocean. Part 16 of the EN54 certification is a certification for voice alarm control and indicating equipment. To see or download the certificate click here.