Difference between revisions of "Upload Audio Messages"
Jump to navigation
Jump to search
| Line 10: | Line 10: | ||
A guide on how to generate .wav files can be found [[Generate wav files|here]]. | A guide on how to generate .wav files can be found [[Generate wav files|here]]. | ||
| − | * A total of up to '''10 Mbyte''' of customized .wav-files | + | * A total of up to '''10 Mbyte''' of customized .wav-files can be uploaded in the controller. |
** Uncompressed PCM will give approx. 5 minutes (320 seconds). | ** Uncompressed PCM will give approx. 5 minutes (320 seconds). | ||
** Using MS ADPCM will give approx. 21 minutes (1280 seconds) (MS ADPCM can be used for speech). | ** Using MS ADPCM will give approx. 21 minutes (1280 seconds) (MS ADPCM can be used for speech). | ||
Revision as of 14:30, 30 April 2018
This article describe how to upload prerecorded messages to the Exigo Controller.
Uploaded messages can be dispatched in the system.
The Audio Message must be in .wav format:
- 16kHz sample rate
- 16 bit resolution
- Mono
A guide on how to generate .wav files can be found here.
- A total of up to 10 Mbyte of customized .wav-files can be uploaded in the controller.
- Uncompressed PCM will give approx. 5 minutes (320 seconds).
- Using MS ADPCM will give approx. 21 minutes (1280 seconds) (MS ADPCM can be used for speech).
- Maximum 99 messages.
Upload Audio To The Controller
The audio messages are uploaded via the web interface of the Primary System Controller PSC:
- Log in to the Primary System Controller. Default username: admin and password: alphaadmin.
- Navigate to System Configuration > Messaging.
File:Upload Messages 1.JPG
Upload Messages
- Select Message Group 30 in Message Group.
- The Group Index reflects the Message in EMT - Group Index 1 is Message 1, Group Index 2 is Message 2 and so on.
- Browse to the .wav file you want to upload.
- Click Upload.
