VCOR-15
Volume controller w/24VDC override, 15W, white
The VCOR-15 is a 100 volt volume control.
It can handle up to 15 watts of power and is very durable thanks to the step-by-step attenuation in 11 steps + zero position.
The VCOR-15 is designed to handle 24V priority signals. This means that you can always get an announcement out at full audio, even to zones where the local volume control is in the ‘OFF’ position!
If your amplifier has a 24V priority output, it will send a 24V signal when you push the talk button on the microphone.
The 24V signal will close a relay on the VCOR-15 volume control, and the local volume settings will be overridden. This can be very useful for emergency or evacuation messages.
The VCOR-15 is built on a universal chassis that easily can be integrated with Gira, Jung and Euro.
Dimensions
Connections
Cable requirements:
Approved ships cable 0,5 – 1,5 mm2 with outer braided tinned copper screen.
The screens must be interconnected and grounded in a common ground point in the central unit only
Similar Products
|
|---|
| VCOR-60 |
Additional documentation
For more documentation, please visit the Zenitel web page: https://www.zenitel.com/product/vcor-15
