Upload Chimes
Revision as of 14:10, 6 July 2016 by Gsorensen (talk | contribs) (Created page with "thumb|600px|Message Control This article describe how to upload chimes to the Exigo Controller.<br> Audio events in Exigo can play a chime signal...")
This article describe how to upload chimes to the Exigo Controller.
Audio events in Exigo can play a chime signal in front of the audio.
Different chimes can be used to indicate the importance of a message
The Chimes must be in .wav format:
- 16kHz sample rate
- 16 bit resolution
- Mono
A guide on how to generate .wav files can be found here.
- A total of up to 10 Mbyte of customized .wav-files (Approx. 21 min 20 sec of speech) can be uploaded in the controller.
- Any number of .wav (Message Group 30).
Upload Audio To The Controller
The audio messages are uploaded via the web interface of the Primary System Controller PSC:
- Log in to the Primary System Controller. Default username: admin and password: alphaadmin.
- Navigate to System Configuration > Messaging.
- Select Message Group 30 in Message Group.
- The Group Index reflects the Message in EMT - Group Index 1 is Message 1, Group Index 2 is Message 2 and so on.
- Browse to the .wav file you want to upload.
- Click Upload.