Difference between revisions of "Upload Chimes"
Jump to navigation
Jump to search
(3 intermediate revisions by the same user not shown) | |||
Line 4: | Line 4: | ||
Different chimes can be used to indicate the importance of a message. | Different chimes can be used to indicate the importance of a message. | ||
− | The Chimes must be in '''.wav''' format: | + | The Chimes must be in '''.wav''' format, and the following codecs are supported:: |
− | * | + | * PCM files at 16kHz samplerate (linear 16bit), mono (1 channel) |
− | * | + | * MS ADPCM at 16kHz samplerate, mono (1 channel) |
− | * | + | * IMA ADPCM at 16kHz samplerate, mono (1 channel)''' |
A guide on how to generate .wav files can be found [[Generate wav files|here]]. | A guide on how to generate .wav files can be found [[Generate wav files|here]]. | ||
− | * A total of up to '''10 Mbyte''' of customized .wav-files | + | * A total of up to '''10 Mbyte''' of customized .wav-files can be uploaded in the controller. |
− | * | + | ** Uncompressed PCM will give approx. 5 minutes (320 seconds). |
+ | ** Using MS ADPCM will give approx. 21 minutes (1280 seconds) (MS ADPCM can be used for speech). | ||
+ | * Maximum 99 chimes. | ||
==Upload Audio To The Controller== | ==Upload Audio To The Controller== |
Latest revision as of 09:34, 9 May 2018
This article describe how to upload chimes to the Exigo Controller.
Audio events in Exigo can play a chime signal in front of the audio.
Different chimes can be used to indicate the importance of a message.
The Chimes must be in .wav format, and the following codecs are supported::
- PCM files at 16kHz samplerate (linear 16bit), mono (1 channel)
- MS ADPCM at 16kHz samplerate, mono (1 channel)
- IMA ADPCM at 16kHz samplerate, mono (1 channel)
A guide on how to generate .wav files can be found here.
- A total of up to 10 Mbyte of customized .wav-files can be uploaded in the controller.
- Uncompressed PCM will give approx. 5 minutes (320 seconds).
- Using MS ADPCM will give approx. 21 minutes (1280 seconds) (MS ADPCM can be used for speech).
- Maximum 99 chimes.
Upload Audio To The Controller
The Chimes are uploaded via the web interface of the Primary System Controller PSC:
- Log in to the Primary System Controller. Default username: admin and password: alphaadmin.
- Navigate to System Configuration > Messaging.
- Select Message Group 30 in Message Group.
- The Group Index reflects the Chime in EMT - Group Index 501 is Chime 1, Group Index 502 is Chime 2 and so on.
- Browse to the .wav file you want to upload.
- Click Upload.