Difference between revisions of "Tick Tone Control"

From exigoWiki
Jump to navigation Jump to search
Line 1: Line 1:
−
[[Category:Exigo features]]
 
 
[[File:Ticktonecontrol.png|thumb|alt=Tick tock control function|Tick tock control]]
 
[[File:Ticktonecontrol.png|thumb|alt=Tick tock control function|Tick tock control]]
  
−
Tick tone control is a function which can be used to control tick tones in a zone. In an [[AB system]] it is possible to start two different tick tones in the same zone (zone A and zone B) at the same time which allows for a quicker check of the systems.
+
Tick Tone Control is used to control advanced tick tones in zones. Tick tones can still be controlled from the system GUI for each channel, but Tick Tone Control will perform it for all zones, and moreover, can also define different tick tones for System A and System B respectively.  
  
 
The function can be assigned to both DAK keys and control inputs.
 
The function can be assigned to both DAK keys and control inputs.
 +
 +
* Drag-and-drop '''Input Actions -> Tick Tone Control''' to:
 +
'''Amplifier -> Control Inputs -> CI -> CI_1-CI_6 -> on_action/off_action'''
 +
 +
or
 +
 +
'''Access Panel -> Programmable Keys -> Key -> p1-px -> press_action/release_action'''
  
 
==Settings==
 
==Settings==
 
[[File:Ticktonecontrol_advanced.png|alt=Tick tock control function with advanced parameters|Tick tock control]]
 
[[File:Ticktonecontrol_advanced.png|alt=Tick tock control function with advanced parameters|Tick tock control]]
−
{| class="wikitable"
+
<br style="clear:both;" />
−
!colspan="6"|Parameters
+
 
−
|-
+
'''<u>Tick Tone A</u>''' <br>
−
|Tick tone A
+
The tick tone that will be played in System A. There are 3 types of tick tones available in Exigo version 1.2.
−
|Which tick tone should be used in A system.
+
 
−
|-
+
'''<u>Tick Tone B</u>''' <br>
−
|Tick tone B
+
The tick tone that will be played in System B (only available in A/B System projects). There are 3 types of tick tones available in Exigo version 1.2.
−
|Which tick should be used in B system
+
 
−
|-
+
'''<u>Activation</u>''' <br>
−
|Activation
+
Start, Stop or Toggle the broadcast.
−
|What should happen when this specific function is started (start/stop/toggle)
+
 
−
|-
+
'''<u>Destination</u>''' <br>
−
|Destination
+
The Zone(s) that will receive the broadcast. This may be left blank if access panel keys are used for zone selection.
−
|Pre selected zones. If no zones are selected dynamically selected zones will be used.
+
 
−
|-
+
'''<u>Repetitions</u>''' <br>
−
|Repetitions
+
The number of times the broadcast is played back. Check the Loop box for continuous broadcast.
−
|How many times the tick tone sequence should repeat or if it should loop.
+
 
−
|-
+
'''<u>Priority</u>''' <br>
−
|Priority
+
The priority of the broadcast. Check the Replace box to make this broadcast replace other broadcasts with the same priority. If the box is not checked, broadcasts with the same priority will
−
|Which [[priority]] the tick tone function should have. 100 is default.
+
be shown as busy. Default is 100.
−
|-
+
 
−
|Cycle time
+
'''<u>Cycle Time</u>''' <br>
−
|How long each cycle should take
+
Time in seconds for the start of the next broadcast.
−
|-
+
 
−
|Offset B
+
'''<u>Offset B</u>''' <br>
−
|How much start of playback of tick tone in B should be offset relative to A.
+
Time in seconds before the broadcast is started in System B. The purpose of this is to ensure that the tick tone broadcasts do not start at the same time in both System A and System B.
−
|-
 
−
|On interrupt
 
−
|Cancel will cancel tick tone if any other activity is started in the zone
 
−
|-
 
−
|
 
−
|Mute will que the tick tone until the zone is free of other activity with higher priority
 
−
|}
 
  
−
==Leds==
+
==LEDs==
−
Red led indicates that the function is active.
+
Red LED indicates that the function is active.
  
 
==Use cases:==
 
==Use cases:==
Line 120: Line 119:
 
== Availability ==
 
== Availability ==
 
This function is available on Exigo 1.2 and newer.
 
This function is available on Exigo 1.2 and newer.
 +
 +
[[Category:Exigo features]]

Revision as of 11:40, 24 June 2016

Tick tock control function
Tick tock control

Tick Tone Control is used to control advanced tick tones in zones. Tick tones can still be controlled from the system GUI for each channel, but Tick Tone Control will perform it for all zones, and moreover, can also define different tick tones for System A and System B respectively.

The function can be assigned to both DAK keys and control inputs.

  • Drag-and-drop Input Actions -> Tick Tone Control to:

Amplifier -> Control Inputs -> CI -> CI_1-CI_6 -> on_action/off_action

or

Access Panel -> Programmable Keys -> Key -> p1-px -> press_action/release_action

Settings

Tick tock control function with advanced parameters

Tick Tone A
The tick tone that will be played in System A. There are 3 types of tick tones available in Exigo version 1.2.

Tick Tone B
The tick tone that will be played in System B (only available in A/B System projects). There are 3 types of tick tones available in Exigo version 1.2.

Activation
Start, Stop or Toggle the broadcast.

Destination
The Zone(s) that will receive the broadcast. This may be left blank if access panel keys are used for zone selection.

Repetitions
The number of times the broadcast is played back. Check the Loop box for continuous broadcast.

Priority
The priority of the broadcast. Check the Replace box to make this broadcast replace other broadcasts with the same priority. If the box is not checked, broadcasts with the same priority will be shown as busy. Default is 100.

Cycle Time
Time in seconds for the start of the next broadcast.

Offset B
Time in seconds before the broadcast is started in System B. The purpose of this is to ensure that the tick tone broadcasts do not start at the same time in both System A and System B.

LEDs

Red LED indicates that the function is active.

Use cases:

Case 1: Tick tone test with dynamic zones in an AB system

In this case one button is designated to the tick tone function, while multiple other buttons are used for zone select.

Parameters
Tick tone A Tick Tone 1A
Tick tone B Tick Tone 1B
Activation Toggle
Destination Empty
Repetitions Loop
Priority 100 (default)
Cycle time 10 (default)
Offset B 1 (default)
On interrupt Cancel

Here the operator will first select zones and then start the tick tone function. After checking the speaker loops he deactivates the tick tone again by selecting the appropriate zones and then pressing the tick tone button again.

Case 2: Tick tone in a complete single system

In this case the tick tone button should start the tick tone test and allow it to run in all the zones for a set amount of time.

Parameters
Tick tone A Tick Tone 1A
Tick tone B Tick Tone 1B
Activation Toggle
Destination All zones
Repetitions 50
Priority 100 (default)
Cycle time 10 (default)
Offset B 1 (default)
On interrupt Cancel

By pressing this button the operator will allow the function to run for 50 cycles in all zones before terminating.

Availability

This function is available on Exigo 1.2 and newer.

Retrieved from "https://exigo.zenitel.com/w/index.php?title=Tick_Tone_Control&oldid=2469"