Difference between revisions of "Release Note Exigo 1.6"
Rlorentzen (talk | contribs) (Created page with "= Exigo 1.6.3.1 = Release status: Official, available Release date: 26.04.2022 Software collection file: EXIGO-1.6.3.1.zip == Software included in EXIGO-1.6.3.1.zip == {...") |
Rlorentzen (talk | contribs) (→MTN-2936 Missing device report can be sent as SNMP trap) |
||
Line 77: | Line 77: | ||
System controller can send missing device report or PSC down as SNMP trap. | System controller can send missing device report or PSC down as SNMP trap. | ||
− | SNMP trap, Missing Device | + | '''SNMP trap, Missing Device''' |
+ | |||
Added snmp trap "Missing Device" for ESC1. | Added snmp trap "Missing Device" for ESC1. | ||
Revision as of 13:55, 9 May 2022
Contents
- 1 Exigo 1.6.3.1
- 1.1 Software included in EXIGO-1.6.3.1.zip
- 1.2 Bugfixes and improvements
- 1.2.1 MTN-3784 Increased timeout for backed up amplifiers detect
- 1.2.2 MTN-3767 EMT: Control backup amplifiers
- 1.2.3 MTN-3720 EMT Monitoring: Destinations in Audio Activity
- 1.2.4 MTN-3702 EMT: Copy to paired device now works
- 1.2.5 MTN-3665 EMT: Added scrollbar to AVC section (Zone Editor) and Device Configuration List
- 1.2.6 MTN-3626 Kit devices will now read their IP address
- 1.2.7 MTN-3612 EMT Monitoring: Queue in Audio Activity monitoring
- 1.2.8 MTN-3608 EMT: IP-LCM Control Input Monitoring removal
- 1.2.9 MTN-3522 EMT: IP-LCM inherit in A/B System
- 1.2.10 MTN-3507 Control inputs on IP-LCM, Kits and Amplifiers now de-escalate correctly after escalated recall
- 1.2.11 MTN-3474 EMT: Delay for missing device possible to set on flowire
- 1.2.12 MTN-3468 EMT Monitoring: Showing fault list on first connect
- 1.2.13 MTN-3218 EMT: Alarm with frequencies that are not within 50Hz to 4kHz range can not be verified
- 1.2.14 MTN-3041 EMT: Global snmp fixes
- 1.2.15 MTN-2936 Missing device report can be sent as SNMP trap
- 1.2.16 MTN-1956 External fault on panel
- 1.2.17 MTN-1919 Fault LED will no longer stay lit after LED/system testing
- 1.2.18 EPB-492 EMT: Corrected resolution of delay on output from 10 ms to 20 ms
- 1.2.19 EPB-484 SLM audio level values are now reported correctly
- 1.2.20 EPB-470 GPO's can now be tested from IP-LCM's webpage
- 1.2.21 EPB-452 CO - fault indication on unacknowledged fault
- 1.3 Known Issues
- 2 Exigo 1.5.3.0
Exigo 1.6.3.1
Release status: Official, available Release date: 26.04.2022 Software collection file: EXIGO-1.6.3.1.zip
Software included in EXIGO-1.6.3.1.zip
Product | Version | Product description |
VSF-Turbine | VSFT-PA.6.5.3.3 | Firmware for the following devices: ESC1 (Secondary System Controller), ENA2100, ENA2200 AC2, ENA2400 AC2, ECPIR-3P, ECPIR-P, EAPIR-8, EAPFX-1, EAPFX-6, EAPII-1, EAPII-6, TKIS-2, TKIE-2, IP-LCM. |
AlphaSys Firmware | 13.0.3.15 | Firmware for the ESC1 (Primary System Controller/AMC-IP board) alpha-sys_13.0.3.15.apkg, bsp_32.2.3.6.apkg |
VS-EMT Exigo Management Tools | EMT-1.7.3.1 | Configuration tool, installed on a Windows PC |
VS-DEVICE-MIB | 201806190000Z | SNMP MIB for Exigo EXI-Devices, for upload in 3rd-party SNMP based monitoring tools |
Bugfixes and improvements
MTN-3784 Increased timeout for backed up amplifiers detect
Backup amplifier will wait longer after boot for backed up amplifiers to get ready to compensate for network equipment slow startup times.
MTN-3767 EMT: Control backup amplifiers
Take over and release amplifier options for ENA2200-AC2 and ENA2400-AC2 are now available.
MTN-3720 EMT Monitoring: Destinations in Audio Activity
Previously, only zones were available as destination for Audio Activity. Now, same destinations as for controller (ESC) are available in EMT Monitoring.
MTN-3702 EMT: Copy to paired device now works
Copy to paired device in EMT did not include all settings. This is now fixed.
MTN-3665 EMT: Added scrollbar to AVC section (Zone Editor) and Device Configuration List
MTN-3626 Kit devices will now read their IP address
MTN-3612 EMT Monitoring: Queue in Audio Activity monitoring
Queued call activity was not always appearing in monitoring list. Solved.
MTN-3608 EMT: IP-LCM Control Input Monitoring removal
IP-LCM is not capable of monitoring control inputs. Selection removed in EMT.
MTN-3522 EMT: IP-LCM inherit in A/B System
IP-LCM B not inheriting when configured to inherit. Now working.
MTN-3507 Control inputs on IP-LCM, Kits and Amplifiers now de-escalate correctly after escalated recall
MTN-3474 EMT: Delay for missing device possible to set on flowire
Flowires were not included when setting global delay time for missing device registration. Now working, and delay option can be set on each flowire individually.
MTN-3468 EMT Monitoring: Showing fault list on first connect
On first connect, EMT did not always bring up the fault list. Working fine now.
MTN-3218 EMT: Alarm with frequencies that are not within 50Hz to 4kHz range can not be verified
MTN-3041 EMT: Global snmp fixes
Two issues fixed:
1. Bad indication for global snmp settings on device when selecting global. 2. During project reload, devices were not loading snmp settings properly when configured to global.
MTN-2936 Missing device report can be sent as SNMP trap
System controller can send missing device report or PSC down as SNMP trap.
SNMP trap, Missing Device
Added snmp trap "Missing Device" for ESC1.
MTN-1956 External fault on panel
When multiple buttons were configured with same external fault ID, and user pressed off one of the buttons, system turned off all alarm LEDs with same fault ID even with other buttons active. Now working as it should.
MTN-1919 Fault LED will no longer stay lit after LED/system testing
EPB-492 EMT: Corrected resolution of delay on output from 10 ms to 20 ms
EPB-484 SLM audio level values are now reported correctly
EPB-470 GPO's can now be tested from IP-LCM's webpage
EPB-452 CO - fault indication on unacknowledged fault
From EMT, user may activate GPO to trigger only at unacknowledged faults in the fault state selection.
Known Issues
MTN-3565 When booting up an AB system, the controller comes up with "buzzer active" with no faults
This happens on the A controller. Click the wheel to silence the "buzzer".
Exigo 1.5.3.0
Release status: Official, available Release date: 24.11.2021 Software collection file: EXIGO-1.5.3.0.zip
Software included in EXIGO-1.5.3.0.zip
Product | Version | Product description |
VSF-Turbine | VSFT-PA.6.3.3.0 | Firmware for the following devices: ESC1 (Secondary System Controller), ENA2100, ENA2200 AC2, ENA2400 AC2, ECPIR-3P, ECPIR-P, EAPIR-8, EAPFX-1, EAPFX-6, EAPII-1, EAPII-6, TKIS-2, TKIE-2, IP-LCM. |
AlphaSys Firmware | 13.0.3.13 | Firmware for the ESC1 (Primary System Controller/AMC-IP board) alpha-sys_13.0.3.13.apkg, bsp_32.2.3.6.apkg |
VS-EMT Exigo Management Tools | EMT-1.6.3.0 | Configuration tool, installed on a Windows PC |
VS-DEVICE-MIB | 201806190000Z | SNMP MIB for Exigo EXI-Devices, for upload in 3rd-party SNMP based monitoring tools |
New Features and Enhancements
EPB-303 ENA2x00 AC2 released
From Exigo 1.5.3.0 version the ENA2x00 AC2 are supported. To learn more about the new amplifiers please go to https://www.zenitel.com/product. Please note that ENA2x00 AC2 are not yet supported in SIP and ICX AlphaCom mode.
Bugfixes and improvements
MTN-3539 SNMP temperature is now displayed correctly
MTN-3467 Global system settings override device settings
Notification is added to system settings page to warn user that saving system settings overrides local settings.
When a tick tone was started from amplifier web, the button label was not refreshed when another activity stopped the tick tone. The web indicated that tick tone was still active. This is now fixed.
MTN-2172 Tick tone will now be played out on access panels which is part of a zone
Known Issues
MTN-3565 When booting up an AB system, the controller comes up with "buzzer active" with no faults
This happens on the A controller. Click the wheel to silence the "buzzer".