IP Configuration

Best practice - Create a table with all relevant information

This article describes how to configure the IP settings in Exigo.
Initially all devices must be configured with:

• Own IP address
• IP Address of Domain Controller
• ID number (Directory Number)
• Default Gateway

Creating a table with relevant information is considered good practice.

Primary System Controller

To set the IP address for the Primary System Controller:

• Open the front cover on the ESC1.
• Connect a PC to the service port (npe_eth0). This has 169.254.1.5 as default IP.
• Log on with a Web Browser (admin/alphaadmin).
• Go to System Configuration -> Interfaces and set the desired IP Address of the Primary Controller (npe_eth1).

Secondary System Controller

To configure the IP setting for the Secondary System Controller:

• Connect a PC to either Eth1 or Eth2 on ESC1.

Log on to SSC with a Web Browser Set the IP Address of the SSC Set IP address of the Domain Controller Set the Directory Number