Difference between revisions of "ENA2xxx Shutdown Fix"
Jump to navigation
Jump to search
(→Log on to the ENA2xxx with SSH) |
(→Log on to the ENA2xxx with SSH) |
||
| Line 9: | Line 9: | ||
# "PuTTY" (or another terminal emulator), and select: | # "PuTTY" (or another terminal emulator), and select: | ||
::* '''Host Name''': IP address of the ENA2xxx device | ::* '''Host Name''': IP address of the ENA2xxx device | ||
| − | ::* '''Port'' = 22 | + | ::* '''Port''' = 22 |
::* '''Connection type''' = SSH | ::* '''Connection type''' = SSH | ||
::* '''Select Open to start communication. | ::* '''Select Open to start communication. | ||
Revision as of 13:15, 16 March 2018
An issue has been observed on ENA2200 and ENA2400 where audio channels goes in shutdown mode when playing audio with low frequencies.
To prevent this, a high pass filter must be added to the channels.
Procedure
Log on to the ENA2xxx with SSH
SSH connection Step-By-Step
- Open SSH in the firewall
- "PuTTY" (or another terminal emulator), and select:
- Host Name: IP address of the ENA2xxx device
- Port = 22
- Connection type = SSH
- Select Open to start communication.
