Difference between revisions of "ENA2xxx Shutdown Fix"
Jump to navigation
Jump to search
(→Log on to the ENA2xxx with SSH) |
|||
| Line 6: | Line 6: | ||
'''SSH connection Step-By-Step''' | '''SSH connection Step-By-Step''' | ||
| − | #Connect | + | #Connect to the ENA2xxx with a Serial cable. |
| − | |||
#Start "PuTTY" (or another terminal emulator), and select: | #Start "PuTTY" (or another terminal emulator), and select: | ||
::*'''Connection type''' = Serial | ::*'''Connection type''' = Serial | ||
Revision as of 13:01, 16 March 2018
An issue has been observed on ENA2200 and ENA2400 where audio channels goes in shutdown mode when playing audio with low frequencies.
To prevent this, a high pass filter must be added to the channels.
Procedure
Log on to the ENA2xxx with SSH
SSH connection Step-By-Step
- Connect to the ENA2xxx with a Serial cable.
- Start "PuTTY" (or another terminal emulator), and select:
- Connection type = Serial
- Serial line: Set COM port number according to the device installation
- Speed = 115200.
- Select Open to start communication. Leave the window open.
