Difference between revisions of "ENA2100-AC One Channel Mode"
Jump to navigation
Jump to search
(Created page with "The ENA2100-AC Amplifier supports One Channel Mode. When "One Channel mode" is activated, the two loudspeaker channels will play identical audio, and the audio will be in...") |
|||
| Line 3: | Line 3: | ||
When "One Channel mode" is activated, the two loudspeaker channels will play identical audio, and the audio will be in phase. <br> | When "One Channel mode" is activated, the two loudspeaker channels will play identical audio, and the audio will be in phase. <br> | ||
One can then choose to use two separate loudspeaker loops, each with maximum 100W, or one can bridge the two output channels, and use one loudspeaker loop with up to 200W load. | One can then choose to use two separate loudspeaker loops, each with maximum 100W, or one can bridge the two output channels, and use one loudspeaker loop with up to 200W load. | ||
| + | |||
| + | == Configuration == | ||
| + | One Channel Mode is configured in [[EMT overview|EMT]]. <br> | ||
| + | |||
== Availability == | == Availability == | ||
Revision as of 11:33, 10 January 2019
The ENA2100-AC Amplifier supports One Channel Mode.
When "One Channel mode" is activated, the two loudspeaker channels will play identical audio, and the audio will be in phase.
One can then choose to use two separate loudspeaker loops, each with maximum 100W, or one can bridge the two output channels, and use one loudspeaker loop with up to 200W load.
Configuration
One Channel Mode is configured in EMT.
Availability
This function is available from Exigo 1.4 and later.
