Difference between revisions of "AC and DC power monitoring"
Line 17: | Line 17: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
These settings will change AC and DC monitoring for all ESC1 and ENA devices in the system.<br> | These settings will change AC and DC monitoring for all ESC1 and ENA devices in the system.<br> | ||
+ | |||
+ | == Individual Settings == | ||
+ | It is also possible not use | ||
Revision as of 09:48, 6 December 2016
This article explains how to enable monitoring for bot AC and DC power input.
The Exigo ESC1 and the ENA2200 can be connected to a primary AC power source and a secondary DC power source.
Switch-over between these power supplies is seamless and controlled by the units themselves.
The power input monitoring can be individually turned on or off.
Database Wizard
When creating a new database using the wizard both the AC and the DC power monitoring is by default turned off:
Selecting this will turn on AC or DC monitoring for all ESC1 and ENA devices in the system.
EMT Settings
All the settings in the wizard can be changed later on, including AC and DC monitoring.
In the device three go to System -> Default Configuration:
These settings will change AC and DC monitoring for all ESC1 and ENA devices in the system.
Individual Settings
It is also possible not use