Turbine Image Recovery

From exigoWiki
Revision as of 13:47, 17 August 2016 by Gsorensen (talk | contribs)
Jump to navigation Jump to search

This article describes how to upload firmware to a Turbine device if the firmware is corrupted and the unit is bricked.

This applies to the following devices:

  • ESC1 Controller - only the Secondary System Controller.
  • ENA Amplifiers
  • ECPIR-P/ECPIR-3P/EAPIR-8 Access Panels.
  • EAPII-1/EAPII-6 Access Panels.
  • TKIS-2/TKIE-1 kits.

Prerequisite

The upgrade process is done by using the following tools:

  • Standard TFTP server.
  • Serial console to run the process.

In order to upload the firmware you need the following:

  • USB Cable. A toturial on how to make the cable can be found here.
  • TFTP server with the image package. TFTP server
  • SSH client. PuTTY:

Connection

A tutorial on how to connect PC to Turbine device can be found here.

Upload Step-By-Step

  1. Connect the USB cable to the turbine device.