ENA2xxx Shutdown Fix

An issue has been observed on Exigo-1.3.3.0 on ENA2200 and ENA2400 where audio channels goes in shutdown mode when playing audio with low frequencies.
To prevent this, a filter needs to be added to the channels to protect it from the very lowest frequencies.

The issue will be fixed in Exigo-1.3.3.1.

Procedure

Log on to the ENA2xxx with SSH

SSH connection Step-By-Step

1. Open SSH in the firewall
2. "PuTTY" (or another terminal emulator), and select:

• Host Name: IP address of the ENA2xxx device
• Port = 22
• Connection type = SSH
• Select Open to start communication.

SSH connection

Default user and password is root.

SSH login

Add the Hi-Pass filter to the Edgeaudio client

To open the Edgeaudio file in NANO, type in this command:

nano /opt/data/config/edgeaudioclient.ini

Open Edgeaudioclient.ini file

Press enter.

At the end of the file add these lines:

[DAC_Left_48000]
Biquad_A=7C7E7A8381867C7E7A7C723086EA76
Biquad_B=583A4A583A4A583A4AAE1B55C2E02C
[DAC_Right_48000]
Biquad_A=7C7E7A8381867C7E7A7C723086EA76
Biquad_B=583A4A583A4A583A4AAE1B55C2E02C

Add the lines in the file

Save the file - exit SSH connection.
Reboot the ENA2xxx.