Alarm Control
Revision as of 15:00, 31 May 2016 by Rlorentzen (talk | contribs)
Alarm Control is used to control the alarm generator. This concerns programmed alarms that can be used if a control output should toggle in accordance with the actual alarm.
Source The Alarm source that should be controlled. Activation Start, Stop or Toggle the Alarm. Destination Zones in which Alarm will be broadcast. Alarm broadcasts usually go to all zones. This field can be left blank if access panel keys are used for zone selection. Priority In this example for General Alarm, the priority should be set high, with only Emergency PA as a higher priority in the system. The highest priority is 1 and the lowest is 100.
