Analog Integration

Analog integration example

This article explains how to us an analog audio output from Exigo to integrate with 3rd party equipment.
There is two options for analog audio outputs in Exigo:

• Line output on ESC1 controller(s)
• Line output on kits (TKIS-2 or TKIE-1/TKIE-2)

Best practice for line outputs is to use a dedicated zone.
It can be part of another zone, but it is easier to control as a unique zone.
Signaling to the external system can be done with control output(s).

ESC1 line output

Using line outputs on ESC1 will be convenient if the external system is located close to the system controller(s).

ESC1 line output wiring example

Kit line output

Kits can be connected over network and the kit itself can therefore be located closer to the external system.

TKIE-1/TKIE-2 line out wiring example

Configuration

Configure a line output to a dedicated zone.
In the device three select the desired device (ESC1 or Kit) -> Audio Lines -> Line Output:

Assigning a line output to a dedicated zone

Drag the Line Output to the dedicated output.