Turbine Image Recovery
Jump to navigation
Jump to search
This article describes how to upload firmware to a Turbine device if the firmware is corrupted and the unit is bricked.
This applies to the following devices:
- ESC1 Controller - only the Secondary System Controller.
- ENA Amplifiers
- ECPIR-P/ECPIR-3P/EAPIR-8 Access Panels.
- EAPII-1/EAPII-6 Access Panels.
- TKIS-2/TKIE-1 kits.
Prerequisite
In order to upload the firmware you need the following:
- USB Cable. A toturial on how to make the cable can be found here.
- TFTP server with the image package. TFTP server
