ESC1
Exigo System Controller
- Control and routing of audio channels
- 115 - 230 VAC primary power and 24 - 48 VDC secondary power
- Redundant Ethernet connections
- Digital audio processing
- Receives, handles and stores fault messages from the system
- Interface to PABX and iPBX
- Interface to telecom management, safety, automation and security systems
- Voice message storage
- Programmable alarm generator
- Tick tone generator
The Exigo System Controller is designed for use in marine/offshore and onshore environments. The construction is
extremely robust and can handle mobile environments as well as stationary, temperature controlled rooms. The system
controller is based on IP technology, giving it extreme flexibility, superb audio quality and huge integration possibilities.
The system controller handles routing and prioritization of up to 32 simultaneous audio channels in the system. The audio can be distributed from up to 150 audio inputs to up to 250 zones.
The system controller features a display where status and faults can be viewed. This display also allows configuration of simple parameters. The system controller monitors and receives status information from every component in the system. Faults are time stamped, and presented in chronological order on the display. Buttons allow an operator to acknowledge and reset faults. The network connection to every component in the system is monitored, so a defect switch or broken cable will be detected just as reliably and fast as any other fault in the system.
The system controller also acts as the system’s alarm generator and audio message storage. The embedded alarm generator features a set of the most common alarm tones, but can also be programmed to support custom alarm tones and patterns. Stored voice and audio messages is easily uploaded to the system controller as standard .wav files.
The system controller’s control inputs/outputs and audio inputs can be used locally by the system controller (e.g. for PTT and audio from a handheld microphone) or can be controlled by the system (e.g. audio input for background music).
For increased functionality, one optional function board can be inserted in the system controller. This will allow the controller to connect to 6 analog intercom stations or 12 analog telephones. The function board can also be used to supply the system controller with 12 additional analog audio inputs/outputs.
Additional documentation
For more documentation, please visit the Zenitel web page: https://www.zenitel.com/product/esc-1
