Turbine Image Recovery

From exigoWiki

Revision as of 13:08, 17 August 2016 by Gsorensen (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

This article describes how to upload firmware to a Turbine device if the firmware is corrupted and the unit is bricked.

This applies to the following devices:

ESC1 Controller - only the Secondary System Controller.
ENA Amplifiers
ECPIR-P/ECPIR-3P/EAPIR-8 Access Panels.
EAPII-1/EAPII-6 Access Panels.
TKIS-2/TKIE-1 kits.

Prerequisite

Retrieved from "https://exigo.zenitel.com/w/index.php?title=Turbine_Image_Recovery&oldid=3994"

Troubleshooting