ENA2xxx Shutdown Fix

An issue has been observed on ENA2200 and ENA2400 where audio channels goes in shutdown mode when playing audio with low frequencies.
To prevent this, a high pass filter must be added to the channels.

Procedure

Log on to the ENA2xxx with SSH

SSH connection Step-By-Step

1. Connect to the ENA2xxx with a Serial cable.
2. Start "PuTTY" (or another terminal emulator), and select:

• Connection type = Serial
• Serial line: Set COM port number according to the device installation
• Speed = 115200.
• Select Open to start communication. Leave the window open.

Putty connection