Difference between revisions of "IP Configuration"
Jump to navigation
Jump to search
Line 11: | Line 11: | ||
− | + | == Primary System Controller == | |
+ | To set the IP address for the Primary System Controller do the following: | ||
+ | * Open the front cover on the ESC1. | ||
+ | * Connect a PC to the service port (npe_eth0). This has '''169.254.1.5''' as default IP. | ||
Revision as of 16:35, 22 November 2016
This article describes how to configure the IP settings in Exigo.
Initially all devices must be configured with:
- Own IP address
- IP Address of Domain Controller
- ID number (Directory Number)
- Default Gateway
Creating a table with relevant information is considered good practice.
Primary System Controller
To set the IP address for the Primary System Controller do the following:
- Open the front cover on the ESC1.
- Connect a PC to the service port (npe_eth0). This has 169.254.1.5 as default IP.