Difference between revisions of "Turbine Image Recovery"

From exigoWiki
Jump to navigation Jump to search
(Created page with "This article describes how to upload firmware to a Turbine device if the firmware is corrupted. This applies to the following devices: *ESC1 Controller - only the Secondary S...")
 
Line 1: Line 1:
This article describes how to upload firmware to a Turbine device if the firmware is corrupted.
+
This article describes how to upload firmware to a Turbine device if the firmware is corrupted and the unit is bricked.
  
 
This applies to the following devices:
 
This applies to the following devices:
Line 8: Line 8:
 
*TKIS-2/TKIE-1 kits.
 
*TKIS-2/TKIE-1 kits.
  
==
+
== Prerequisite ==
 +
 
  
  

Revision as of 13:08, 17 August 2016

This article describes how to upload firmware to a Turbine device if the firmware is corrupted and the unit is bricked.

This applies to the following devices:

  • ESC1 Controller - only the Secondary System Controller.
  • ENA Amplifiers
  • ECPIR-P/ECPIR-3P/EAPIR-8 Access Panels.
  • EAPII-1/EAPII-6 Access Panels.
  • TKIS-2/TKIE-1 kits.

Prerequisite