Difference between revisions of "ENA2xxx Shutdown Fix"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
An issue has been observed on '''Exigo-1.3.3.0''' on ENA2200 and ENA2400 where audio channels goes in shutdown mode when playing audio with low frequencies.<br> | An issue has been observed on '''Exigo-1.3.3.0''' on ENA2200 and ENA2400 where audio channels goes in shutdown mode when playing audio with low frequencies.<br> | ||
To prevent this, a filter needs to be added to the channels to protect it from the very lowest frequencies. <br> | To prevent this, a filter needs to be added to the channels to protect it from the very lowest frequencies. <br> | ||
| − | {{Note}}The issue | + | {{Note}}The issue is fixed in [[Downloads#Exigo_Version_1.3|'''Exigo-1.3.3.1''']]. |
== Procedure == | == Procedure == | ||
Revision as of 08:48, 18 May 2018
An issue has been observed on Exigo-1.3.3.0 on ENA2200 and ENA2400 where audio channels goes in shutdown mode when playing audio with low frequencies.
To prevent this, a filter needs to be added to the channels to protect it from the very lowest frequencies.
The issue is fixed in Exigo-1.3.3.1.
Procedure
Log on to the ENA2xxx with SSH
SSH connection Step-By-Step
- Open SSH in the firewall
- "PuTTY" (or another terminal emulator), and select:
- Host Name: IP address of the ENA2xxx device
- Port = 22
- Connection type = SSH
- Select Open to start communication.
Default user and password is root.
Add the Hi-Pass filter to the Edgeaudio client
To open the Edgeaudio file in NANO, type in this command:
nano /opt/data/config/edgeaudioclient.ini
Press enter.
At the end of the file add these lines:
[DAC_Left_48000] Biquad_A=7C7E7A8381867C7E7A7C723086EA76 Biquad_B=583A4A583A4A583A4AAE1B55C2E02C [DAC_Right_48000] Biquad_A=7C7E7A8381867C7E7A7C723086EA76 Biquad_B=583A4A583A4A583A4AAE1B55C2E02C
Save the file - exit SSH connection.
Reboot the ENA2xxx.
