Difference between revisions of "Firewall Settings"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
== Firewall Settings == | == Firewall Settings == | ||
| − | On the Primary System Controller (AMC-IP board) the minimum filters needs to be enabled for Eth1: | + | On the [[AMC-IP|Primary System Controller]] ([[AMC-IP]] board) the minimum filters needs to be enabled for '''Eth1''': |
{| class="wikitable" | {| class="wikitable" | ||
Revision as of 08:48, 24 October 2016
This article describes the firewall/filter settings needed for the Exigo System.
There might be different needs for different system setups.
This settings are what is needed as a minimum to get the system working.
Firewall Settings
On the Primary System Controller (AMC-IP board) the minimum filters needs to be enabled for Eth1:
| Protcol | Port |
|---|---|
| ZAP (Zenitel Application Protocol) | TCP-50004 |
| NTP server | UDP-123 |
| VoIP Audio | UDP-61000:61150 |
| IP Stations | TCP-50001 |
| HTTP | TCP-80 |
For AlphaCom/SIP integration:
| Protcol | Port |
|---|---|
| SIP | UDP-5060 |
