Difference between revisions of "Fault Indication Advanced"
(→Parameter details) |
|||
| Line 27: | Line 27: | ||
'''Subscribe To:''' Options are Faults or Warnings. | '''Subscribe To:''' Options are Faults or Warnings. | ||
| − | + | '''Filter Script:''' Here you type/paste in the script you need.. | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Revision as of 12:19, 9 September 2016
Control Outputs are configured by defining one or more actions to be triggered on an output event.
The Fault Indication Advanced function is used to trigger the control output with custom filter scripts.
This function can be useful if you have specific need that cannot be accomplished with Fault Indication.
To solve the needs a custom script can then be used.
Assigning Fault Indication Advanced to a Control Output
To assign the function Fault Indication Advanced to an Control Output:
- In Components view, open Output Actions
- In System, identify the Controller, the Amplifier or the Access Panel to be used, and expand to Device > Control Outputs.
- Drag Fault Indication Advanced to the Control Output you want to use.
Parameter details
Idle State: Sets the idle state for the output. The options are Normally Open or Normally Closed
Delay Activation: Delays control output activation for the stipulated number of seconds when triggered.
Reporting System: The system, i.e. System A, System B or System A and B, from which faults will be received (only available in A-B System projects).
Subscribe To: Options are Faults or Warnings.
Filter Script: Here you type/paste in the script you need..
