Difference between revisions of "Turbine Image Recovery"

From exigoWiki
Jump to navigation Jump to search
Line 1: Line 1:
 
This article describes how to upload firmware to a Turbine device if the firmware is corrupted and the unit is bricked.
 
This article describes how to upload firmware to a Turbine device if the firmware is corrupted and the unit is bricked.
 +
 +
It is important that this must be used as a last resort and the only way to reach the unit is using serial port.
  
 
This applies to the following devices:
 
This applies to the following devices:
Line 15: Line 17:
  
 
In order to upload the firmware you need the following:
 
In order to upload the firmware you need the following:
*USB Cable. A toturial on how to make the cable can be found [http://exigowiki.zenitel.com/index.php?title=Turbine_to_PC_physical_connection '''here'''].
+
*USB to Serial Cable. A tutorial on how to make the cable can be found [http://exigowiki.zenitel.com/index.php?title=Turbine_to_PC_physical_connection '''here'''].
 +
This cable must be used for the access panels and the kits.
 +
*For the '''ESC''' Controller and '''ENA''' Amplifiers you need to use a serial cable like this:
 +
[[File:Serial_cable.jpg|thumb|left|500px|Serial cable for ESC and ENA units]]
 +
<br style="clear:both;" />
 +
 
 
*TFTP server with the image package. [http://tftpd32.jounin.net/tftpd32_download.html TFTP server]
 
*TFTP server with the image package. [http://tftpd32.jounin.net/tftpd32_download.html TFTP server]
 
*SSH client. [http://www.chiark.greenend.org.uk/~sgtatham/putty/ PuTTY]:
 
*SSH client. [http://www.chiark.greenend.org.uk/~sgtatham/putty/ PuTTY]:

Revision as of 08:26, 18 August 2016

This article describes how to upload firmware to a Turbine device if the firmware is corrupted and the unit is bricked.

It is important that this must be used as a last resort and the only way to reach the unit is using serial port.

This applies to the following devices:

  • ESC1 Controller - only the Secondary System Controller.
  • ENA Amplifiers
  • ECPIR-P/ECPIR-3P/EAPIR-8 Access Panels.
  • EAPII-1/EAPII-6 Access Panels.
  • TKIS-2/TKIE-1 kits.

Prerequisite

The upgrade process is done by using the following tools:

  • Standard TFTP server.
  • Serial console to run the process.

In order to upload the firmware you need the following:

  • USB to Serial Cable. A tutorial on how to make the cable can be found here.

This cable must be used for the access panels and the kits.

  • For the ESC Controller and ENA Amplifiers you need to use a serial cable like this:
Serial cable for ESC and ENA units


Connection

A tutorial on how to connect PC to Turbine device can be found here.

Procedure

Prepare the TFTP server on the PC

The TFTP server must be prepared with a image package (exi-x.x.x.x).

On a standard TFTP server extract and store the archive to the TFTP root folder.

Step-By-Step

  1. Connect the modified USB cable to the turbine device.
  2. Connect a Ethernet cable for the new Image transfer.