Difference between revisions of "Turbine Image Recovery"
Jump to navigation
Jump to search
(→Prerequisite) |
|||
| Line 22: | Line 22: | ||
A tutorial on how to connect PC to Turbine device can be found [http://exigowiki.zenitel.com/index.php?title=Turbine_to_PC_physical_connection '''here''']. | A tutorial on how to connect PC to Turbine device can be found [http://exigowiki.zenitel.com/index.php?title=Turbine_to_PC_physical_connection '''here''']. | ||
| − | == | + | == Procedure == |
| + | === Prepare the TFTP server on the PC == | ||
| + | The TFTP server must be prepared with a image package (exi-x.x.x.x). | ||
| + | |||
| + | |||
| + | |||
#Connect the USB cable to the turbine device. | #Connect the USB cable to the turbine device. | ||
# | # | ||
Revision as of 13:53, 17 August 2016
This article describes how to upload firmware to a Turbine device if the firmware is corrupted and the unit is bricked.
This applies to the following devices:
- ESC1 Controller - only the Secondary System Controller.
- ENA Amplifiers
- ECPIR-P/ECPIR-3P/EAPIR-8 Access Panels.
- EAPII-1/EAPII-6 Access Panels.
- TKIS-2/TKIE-1 kits.
Prerequisite
The upgrade process is done by using the following tools:
- Standard TFTP server.
- Serial console to run the process.
In order to upload the firmware you need the following:
- USB Cable. A toturial on how to make the cable can be found here.
- TFTP server with the image package. TFTP server
- SSH client. PuTTY:
Connection
A tutorial on how to connect PC to Turbine device can be found here.
Procedure
= Prepare the TFTP server on the PC
The TFTP server must be prepared with a image package (exi-x.x.x.x).
- Connect the USB cable to the turbine device.
