Difference between revisions of "Turbine Image Recovery"
Jump to navigation
Jump to search
Line 9: | Line 9: | ||
== Prerequisite == | == Prerequisite == | ||
+ | |||
+ | The upgrade process is done by using the following tools: | ||
+ | *Standard TFTP server. | ||
+ | *Serial console to run the process. | ||
In order to upload the firmware you need the following: | In order to upload the firmware you need the following: | ||
Line 17: | Line 21: | ||
== Connection == | == Connection == | ||
A tutorial on how to connect PC to Turbine device can be found [http://exigowiki.zenitel.com/index.php?title=Turbine_to_PC_physical_connection '''here''']. | A tutorial on how to connect PC to Turbine device can be found [http://exigowiki.zenitel.com/index.php?title=Turbine_to_PC_physical_connection '''here''']. | ||
+ | |||
+ | == Upload Step-By-Step == | ||
+ | #Connect the USB cable to the turbine device. | ||
+ | # | ||
Revision as of 13:47, 17 August 2016
This article describes how to upload firmware to a Turbine device if the firmware is corrupted and the unit is bricked.
This applies to the following devices:
- ESC1 Controller - only the Secondary System Controller.
- ENA Amplifiers
- ECPIR-P/ECPIR-3P/EAPIR-8 Access Panels.
- EAPII-1/EAPII-6 Access Panels.
- TKIS-2/TKIE-1 kits.
Prerequisite
The upgrade process is done by using the following tools:
- Standard TFTP server.
- Serial console to run the process.
In order to upload the firmware you need the following:
- USB Cable. A toturial on how to make the cable can be found here.
- TFTP server with the image package. TFTP server
- SSH client. PuTTY:
Connection
A tutorial on how to connect PC to Turbine device can be found here.
Upload Step-By-Step
- Connect the USB cable to the turbine device.