Difference between revisions of "Turbine Image Recovery"
Jump to navigation
Jump to search
| Line 11: | Line 11: | ||
In order to upload the firmware you need the following: | In order to upload the firmware you need the following: | ||
| − | *USB Cable. A toturial on how to make the cable can be found [http://exigowiki.zenitel.com/index.php?title=Turbine_to_PC_physical_connection '''here''']. | + | *USB Cable. A toturial on how to make the cable can be found [http://exigowiki.zenitel.com/index.php?title=Turbine_to_PC_physical_connection '''here''']. |
| + | *TFTP server with the image package. [http://tftpd32.jounin.net/tftpd32_download.html TFTP server] | ||
Revision as of 13:16, 17 August 2016
This article describes how to upload firmware to a Turbine device if the firmware is corrupted and the unit is bricked.
This applies to the following devices:
- ESC1 Controller - only the Secondary System Controller.
- ENA Amplifiers
- ECPIR-P/ECPIR-3P/EAPIR-8 Access Panels.
- EAPII-1/EAPII-6 Access Panels.
- TKIS-2/TKIE-1 kits.
Prerequisite
In order to upload the firmware you need the following:
- USB Cable. A toturial on how to make the cable can be found here.
- TFTP server with the image package. TFTP server
