Difference between revisions of "ENA2xxx Shutdown Fix"
Jump to navigation
Jump to search
(→Log on to the ENA2xxx with SSH) |
|||
| Line 6: | Line 6: | ||
'''SSH connection Step-By-Step''' | '''SSH connection Step-By-Step''' | ||
| − | + | # Open SSH in the firewall | |
| − | + | # "PuTTY" (or another terminal emulator), and select: | |
| + | ::* '''Host Name''': IP address of the ENA2xxx device | ||
| + | ::* '''Port'' = 22 | ||
| + | ::* '''Connection type''' = SSH | ||
| + | ::* '''Select Open to start communication. | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
[[Category:Troubleshooting]] | [[Category:Troubleshooting]] | ||
Revision as of 12:14, 16 March 2018
An issue has been observed on ENA2200 and ENA2400 where audio channels goes in shutdown mode when playing audio with low frequencies.
To prevent this, a high pass filter must be added to the channels.
Procedure
Log on to the ENA2xxx with SSH
SSH connection Step-By-Step
- Open SSH in the firewall
- "PuTTY" (or another terminal emulator), and select:
- Host Name: IP address of the ENA2xxx device
- 'Port = 22
- Connection type = SSH
- Select Open to start communication.
