Difference between revisions of "ENA2xxx Shutdown Fix"

From exigoWiki
Jump to navigation Jump to search
(Log on to the ENA2xxx with SSH)
(Log on to the ENA2xxx with SSH)
Line 6: Line 6:
  
 
'''SSH connection Step-By-Step'''
 
'''SSH connection Step-By-Step'''
#Connect to the ENA2xxx with a Serial cable.
+
* Open SSH in the firewall
#Start "PuTTY" (or another terminal emulator), and select:
+
*  
::*'''Connection type''' = Serial
 
::*'''Serial line''': Set COM port number according to the device installation
 
::*'''Speed''' = 115200.
 
::*Select '''Open''' to start communication. Leave the window open.
 
[[File:Putty connection.JPG|thumb|left|500px|Putty connection]]
 
<br style="clear:both;" />
 
  
 
[[Category:Troubleshooting]]
 
[[Category:Troubleshooting]]

Revision as of 12:07, 16 March 2018

An issue has been observed on ENA2200 and ENA2400 where audio channels goes in shutdown mode when playing audio with low frequencies.
To prevent this, a high pass filter must be added to the channels.

Procedure

Log on to the ENA2xxx with SSH

SSH connection Step-By-Step

  • Open SSH in the firewall