Difference between revisions of "ENA2xxx Shutdown Fix"
Jump to navigation
Jump to search
(→Procedure) |
|||
Line 5: | Line 5: | ||
=== Log on to the ENA2xxx with SSH === | === Log on to the ENA2xxx with SSH === | ||
− | + | '''SSH connection Step-By-Step''' | |
+ | #Connect the modified USB cable to the access panel or kit. On the '''ESC''' or the '''ENA''' you must use the described Serial cable. | ||
+ | #Connect a Ethernet cable for the new Image transfer. | ||
+ | #Start "PuTTY" (or another terminal emulator), and select: | ||
+ | ::*'''Connection type''' = Serial | ||
+ | ::*'''Serial line''': Set COM port number according to the device installation | ||
+ | ::*'''Speed''' = 115200. | ||
+ | ::*Select '''Open''' to start communication. Leave the window open. | ||
+ | [[File:Putty connection.JPG|thumb|left|500px|Putty connection]] | ||
+ | <br style="clear:both;" /> | ||
[[Category:Troubleshooting]] | [[Category:Troubleshooting]] |
Revision as of 12:00, 16 March 2018
An issue has been observed on ENA2200 and ENA2400 where audio channels goes in shutdown mode when playing audio with low frequencies.
To prevent this, a high pass filter must be added to the channels.
Procedure
Log on to the ENA2xxx with SSH
SSH connection Step-By-Step
- Connect the modified USB cable to the access panel or kit. On the ESC or the ENA you must use the described Serial cable.
- Connect a Ethernet cable for the new Image transfer.
- Start "PuTTY" (or another terminal emulator), and select:
- Connection type = Serial
- Serial line: Set COM port number according to the device installation
- Speed = 115200.
- Select Open to start communication. Leave the window open.