Difference between revisions of "Fault Relay Pulsing"

From exigoWiki
Jump to navigation Jump to search
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
This article describes how to configure pulsing of the fault relay. <br>
 
This article describes how to configure pulsing of the fault relay. <br>
It is possible to have the fault relay of the ESC1 System Controller to pulse (turn off and on again) on new faults, or when faults reappear.
+
It is possible to have the fault relay of the [[ESC1|ESC1 System Controller]] to pulse (turn off and on again) on new faults, or when faults reappear. <br>
 +
The relay will pulse for 1 second.
  
 
== Configuration ==
 
== Configuration ==
 
Go to System and select the ESC1 Controller:
 
Go to System and select the ESC1 Controller:
[[File:Pulse fault relay.png|thumb|left|400px|Pulse Fault Relay]]
+
[[File:Pulse fault relay.png|thumb|left|500px|Pulse Fault Relay]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
 
Tick of Pulse Fault Relay to turn on the functionality.
 
Tick of Pulse Fault Relay to turn on the functionality.

Latest revision as of 10:23, 1 November 2019

This article describes how to configure pulsing of the fault relay.
It is possible to have the fault relay of the ESC1 System Controller to pulse (turn off and on again) on new faults, or when faults reappear.
The relay will pulse for 1 second.

Configuration

Go to System and select the ESC1 Controller:

Pulse Fault Relay


Tick of Pulse Fault Relay to turn on the functionality.

Availability

This function is available from Exigo 1.4.3.4 and later.