Difference between revisions of "Firewall Settings"
Jump to navigation
Jump to search
(Tag: Visual edit) |
|||
| Line 3: | Line 3: | ||
This article describes the firewall/filter settings needed for the Exigo System.<br> | This article describes the firewall/filter settings needed for the Exigo System.<br> | ||
There might be different needs for different system setups.<br> | There might be different needs for different system setups.<br> | ||
| − | + | These settings are the minimum required to get the system to work. | |
== Firewall Settings == | == Firewall Settings == | ||
| − | On the [[AMC-IP|Primary System Controller]] ([[AMC-IP]] board) the minimum filters | + | On the [[AMC-IP|Primary System Controller]] ([[AMC-IP]] board) the minimum filters have to be enabled for '''Eth1''': |
{| class="wikitable" | {| class="wikitable" | ||
| − | ! style="text-align:left;"| | + | ! style="text-align:left;" | Protocol |
! Port | ! Port | ||
|- | |- | ||
| Line 30: | Line 30: | ||
For AlphaCom/SIP integration: | For AlphaCom/SIP integration: | ||
{| class="wikitable" | {| class="wikitable" | ||
| − | ! style="text-align:left;"| | + | ! style="text-align:left;" | Protocol |
! Port | ! Port | ||
|- | |- | ||
| Line 37: | Line 37: | ||
|} | |} | ||
| − | To adjust filters | + | To adjust filters in the AlphaWeb interface for the Primary System Controller: |
| + | * Go to '''System Configuration''' > '''Filters''' | ||
[[File:Firewall 1.JPG|thumb|left|500px|Primary System Controller - Filter setting]] | [[File:Firewall 1.JPG|thumb|left|500px|Primary System Controller - Filter setting]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | == Setup | + | == Setup Wizard == |
| − | During creation of a new database it is possible to open up for SNMP traffic in the system. | + | During the creation of a new database it is possible to open up for SNMP traffic in the system. |
[[File:Firewall 2.JPG|thumb|left|500px|Setup wizard - SNMP]] | [[File:Firewall 2.JPG|thumb|left|500px|Setup wizard - SNMP]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| Line 49: | Line 50: | ||
== Default Firewall Setting == | == Default Firewall Setting == | ||
The default firewall settings for all endpoints can be changed in EMT.<br> | The default firewall settings for all endpoints can be changed in EMT.<br> | ||
| − | + | * Go to '''System''' > '''Default Firewall Setting''' | |
[[File:Firewall 3.JPG|thumb|left|500px|Default Firewall Setting]] | [[File:Firewall 3.JPG|thumb|left|500px|Default Firewall Setting]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Select the desired firewall/port. <br> | Select the desired firewall/port. <br> | ||
| − | This settings will then be default for all devices. | + | This settings will then be the default for all devices. |
== Individual Settings == | == Individual Settings == | ||
| − | It is possible to set individual firewall | + | It is possible to set individual firewall settings for each device (not recommended).<br> |
| − | In the device tree go to the desired | + | * In the device tree go to the desired '''Device''' > '''Network Interface''' > '''Firewall''' |
[[File:Firewall 4.JPG|thumb|left|500px|Individual Firewall Setting]] | [[File:Firewall 4.JPG|thumb|left|500px|Individual Firewall Setting]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | To change firewall | + | To change firewall settings:<br> |
| − | Select the desired firewall/port and | + | * Select the desired firewall/port and uncheck the '''Use System Setting''' checkbox |
| − | |||
[[Category:Troubleshooting]] | [[Category:Troubleshooting]] | ||
[[Category:Getting started]] | [[Category:Getting started]] | ||
Revision as of 13:59, 14 March 2017
This article describes the firewall/filter settings needed for the Exigo System.
There might be different needs for different system setups.
These settings are the minimum required to get the system to work.
Firewall Settings
On the Primary System Controller (AMC-IP board) the minimum filters have to be enabled for Eth1:
| Protocol | Port |
|---|---|
| ZAP (Zenitel Application Protocol) | TCP-50004 |
| NTP server | UDP-123 |
| VoIP Audio | UDP-61000:61150 |
| IP Stations | TCP-50001 |
| HTTP | TCP-80 |
For AlphaCom/SIP integration:
| Protocol | Port |
|---|---|
| SIP | UDP-5060 |
To adjust filters in the AlphaWeb interface for the Primary System Controller:
- Go to System Configuration > Filters
Setup Wizard
During the creation of a new database it is possible to open up for SNMP traffic in the system.
Enabling SNMP can be done on the last page of the wizard.
Default Firewall Setting
The default firewall settings for all endpoints can be changed in EMT.
- Go to System > Default Firewall Setting
Select the desired firewall/port.
This settings will then be the default for all devices.
Individual Settings
It is possible to set individual firewall settings for each device (not recommended).
- In the device tree go to the desired Device > Network Interface > Firewall
To change firewall settings:
- Select the desired firewall/port and uncheck the Use System Setting checkbox
