Difference between revisions of "Turbine Image Recovery"
Jump to navigation
Jump to search
(→Prerequisite) |
|||
| Line 17: | Line 17: | ||
*USB Cable. A toturial on how to make the cable can be found [http://exigowiki.zenitel.com/index.php?title=Turbine_to_PC_physical_connection '''here''']. | *USB Cable. A toturial on how to make the cable can be found [http://exigowiki.zenitel.com/index.php?title=Turbine_to_PC_physical_connection '''here''']. | ||
*TFTP server with the image package. [http://tftpd32.jounin.net/tftpd32_download.html TFTP server] | *TFTP server with the image package. [http://tftpd32.jounin.net/tftpd32_download.html TFTP server] | ||
| − | *SSH client. [http://www.chiark.greenend.org.uk/~sgtatham/putty/ PuTTY]: | + | *SSH client. [http://www.chiark.greenend.org.uk/~sgtatham/putty/ PuTTY]: |
== Connection == | == Connection == | ||
Revision as of 14:47, 17 August 2016
This article describes how to upload firmware to a Turbine device if the firmware is corrupted and the unit is bricked.
This applies to the following devices:
- ESC1 Controller - only the Secondary System Controller.
- ENA Amplifiers
- ECPIR-P/ECPIR-3P/EAPIR-8 Access Panels.
- EAPII-1/EAPII-6 Access Panels.
- TKIS-2/TKIE-1 kits.
Prerequisite
The upgrade process is done by using the following tools:
- Standard TFTP server.
- Serial console to run the process.
In order to upload the firmware you need the following:
- USB Cable. A toturial on how to make the cable can be found here.
- TFTP server with the image package. TFTP server
- SSH client. PuTTY:
Connection
A tutorial on how to connect PC to Turbine device can be found here.
Upload Step-By-Step
- Connect the USB cable to the turbine device.
