Difference between revisions of "Line Measurement"
| Line 8: | Line 8: | ||
[[access panels|Access Panel]] -> Programmable Keys -> Key -> p1-px -> press_action/release_action | [[access panels|Access Panel]] -> Programmable Keys -> Key -> p1-px -> press_action/release_action | ||
| − | + | Line_Measurement_1.png | |
| + | [[File:Line_Measurement_1.png|left]] | ||
| + | <br style="clear:both;" /> | ||
[[Category:Exigo features]] | [[Category:Exigo features]] | ||
[[Category:Input Actions]] | [[Category:Input Actions]] | ||
Revision as of 12:41, 20 June 2016
Line Measurement is used for the manual control of line monitoring of the system. Manual line monitoring can be set on each channel of the amplifier. When line monitoring is set to manual, this function will, based on zone selection, enable line measurement for at least 5 minutes. During this period, the line will be measured against previous calibrations. To calibrate for the first time, the Activation parameter must be set to Start. This will initiate the process for the channels to be calibrated. Typically, there will be an input on a rack device that should be enabled. Under such a measurement, all COs configured with Line Measurement will be toggled in the selected zones. For example, these can be used to turn off volume controllers.
- Drag-and-drop Input Actions -> Line Measurement to:
Amplifier -> Control Inputs -> CI -> CI_1-CI_6 -> on_action/off_action
or
Access Panel -> Programmable Keys -> Key -> p1-px -> press_action/release_action
Line_Measurement_1.png
