View source for TKIE-2

[[File:TKIE-2.png|thumb|alt=TKIE-2.|TKIE-2]]
'''Voip Intercom Module'''

The TKIE-2 is the extended version of our Turbine Kit range. It is the same Kit as TKIE-1 but with a metal enclosure suitable for DIN-rail mounting. <br>
It offers the same high quality audio as the TKIS-x kit, but adds to the feature list with an extra RJ45 port for dual Ethernet connectivity, dual relays, and a header for easy connection of audio accessories. For high-power applications, the TKIE-2 may be complemented with the [[TA-10]] Relay Module which offers 2 DPDT relays suited for high-voltage/high-current applications.

* IP station kit with extended functionality
* Dual RJ45 for Ethernet connectivity (with switch)
* Dual relays (DPDT)
* 6 configurable I/Os (input, output or LED-driving)
* Line-in/Line-out connectivity for connection to audio devices
* Header for connecting audio accessories
* Possibility for connecting high-power relay module ([[TA-10]])
* High quality Turbine™ class output with 10W amplifier
* Full open duplex and digital noise reduction
* Metal enclosure suitable for DIN-rail mounting

== Connections ==
There are two RJ-45 ports located on the TKIE-2 that are used for PoE/LAN Ethernet connection.

There are 6 I/O connection options for the TKIE-2. These connections are used as digital input (eg. form a closing contact), digital output (5V), or LED driving (20mA max) for connecting sensors, indicators or integration to other systems.

{|border="1"
|Ethernet/Power || The TKIE-2 supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line.*  
|-
|Secondary Power || If PoE in not available, the TKIE-2 can be powered from a 24-48 VDC local power supply.**  
|-
|Relays || There are two Double Throw relay contacts with 60W switching power. COM, NO, NC contacts are provided.
|-
|Input/Output || 6 I/Os are available. Each I/O can be configured as either input, output, or LED driver. 
|-
|Audio Line Out || A balanced 600 ohm audio line out with induction loop signal
|}

 {{Note}} Use cables crimped with ferrules for terminal block connectors

 *If connected to two PoE-capable switches, only one of the ports will negotiate PoE; hence this is not a good solution for 
 power redundancy (switch failure might lead to a reboot). Instead a “dumb” PoE injector (spare-pair power) should be used 
 for the two Ethernet ports or a local 24 VDC local power backup. 

 **If used together with PoE the station can be powered by 24 VDC as a local power backup.

* When the TKIE-2 is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.

[[Image:TFIE Connections.PNG]]

<br style="clear:both;" />

'''P1&P2''' RJ45 PoE port for 10/100 Mbit Ethernet connection.
:The station can be powered from this port if the line supports Power over Ethernet (PoE).

[[File:TCIS Connections 4.PNG|thumb|left|500px|RJ45 PoE port]]
<br style="clear:both;" />

'''P3''' Secondary Power; 24-48VDC

'''P4''' 10-pin plug-on terminal for external connections.
:Pin 1  5.3V
:Pin 2  GND
:Pin 3  Button Input or LED Driver
:Pin 4  Button Input or LED Driver
:Pin 5  Button Input or LED Driver
:Pin 6  Button Input or LED Driver
:Pin 7  Button Input or LED Driver
:Pin 8  Button Input or LED Driver
:Pin 9  600 ohm balanced line out +
:Pin 10  600 ohm balanced line out -1

'''P5''' 6-pin plug-on terminal for external connections.
:Pin 1  COM relay 1
:Pin 2  NO relay 1
:Pin 3  NC relay 1
:Pin 4  COM relay 2
:Pin 5  NO relay 2
:Pin 6  NC relay 2

 {{Note}} Relay 1 is configured as output 7, and Relay 2 is configured as output 8!

'''P6'''  Loudspeaker & Electret microphone
:Pin 1  10W Speaker amplifier +
:Pin 2  10W Speaker amplifier -
:Pin 3  Electret Microphone +
:Pin 4  Electret Microphone -

'''J2'''  [[TA-10|Turbine Relay Module - TA-10]]
 {{Note}} Relay 3 is configured as output 9, and Relay 4 is configured as output 10!

'''J8''' Headset/Handset connector
:Pin 1 Offhook
:Pin 2 GND
:Pin 3 PTT
:Pin 4 Handset Mic Positive
:Pin 5 Handset Mic Negative
:Pin 6 Headphone Positive
:Pin 7 Headphone Negative
:Pin 8 Line In Positive
:Pin 9 Line In Negative

== Accessories ==

{|{{SimpleTable}}
|-
!style="background:#FFFFFF;" width="200"|[[File:TA-10.jpg|100px|link=TA-10]]
|-
|style="text-align:center;"|[[TA-10]]
|-
|}

== Restore Factory Defaults ==
See article: [https://alpha.zenitel.com/index.php/TKIE_Restore_Factory_Defaults Restore Factory Default]


== Additional Documentation ==
For more documentation, please visit the Zenitel web page: https://www.zenitel.com/product/tkie-2

== Availability ==
This device is supported from Exigo 1.3 and newer.


[[Category:Hardware]]
[[Category:Kits]]