TKIE-2

From exigoWiki
Jump to navigation Jump to search
TKIE-2.
TKIE-2

Voip Intercom Module

The TKIE-2 is the extended version of our Turbine Kit range. It is the same Kit as TKIE-1 but with a metal enclosure suitable for DIN-rail mounting.
It offers the same high quality audio as the TKIS-x kit, but adds to the feature list with an extra RJ45 port for dual Ethernet connectivity, dual relays, and a header for easy connection of audio accessories. For high-power applications, the TKIE-2 may be complemented with the TA-10 Relay Module which offers 2 DPDT relays suited for high-voltage/high-current applications.

  • IP station kit with extended functionality
  • Dual RJ45 for Ethernet connectivity (with switch)
  • Dual relays (DPDT)
  • 6 configurable I/Os (input, output or LED-driving)
  • Line-in/Line-out connectivity for connection to audio devices
  • Header for connecting audio accessories
  • Possibility for connecting high-power relay module (TA-10)
  • High quality Turbine™ class output with 10W amplifier
  • Full open duplex and digital noise reduction
  • Metal enclosure suitable for DIN-rail mounting

TKIE-2 Overview

TKIE 2 overview 1.png


TKIE 2 overview 2.png


1 Relay Inputs Programmable relay inputs (NO+NC+COM). Max: 250VAC/220VDC, 2A, 60W
2 I/O interface Interface for control inputs, control outputs and analog audio
3 External Audio Connection for microphone and optional external loudspeaker
4 TA-10 Relay Interface Connects to TA-10 Relay Module for high-power switching applications
5 Ethernet/PoE Port Ethernet connection with Power over Ethernet
6 Secondary Power Connector for secondary local power
7 Ethernet/PoE Port Ethernet connection with Power over Ethernet


Connections

There are two RJ-45 ports located on the TKIE-2 that are used for PoE/LAN Ethernet connection.

There are 6 I/O connection options for the TKIE-2. These connections are used as digital input (eg. form a closing contact), digital output (5V), or LED driving (20mA max) for connecting sensors, indicators or integration to other systems.

Ethernet/Power The TKIE-2 supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line.*
Secondary Power If PoE in not available, the TKIE-2 can be powered from a 24-48 VDC local power supply.**
Relays There are two Double Throw relay contacts with 60W switching power. COM, NO, NC contacts are provided.
Input/Output 6 I/Os are available. Each I/O can be configured as either input, output, or LED driver.
Audio Line Out A balanced 600 ohm audio line out with induction loop signal
Note.PNG Use cables crimped with ferrules for terminal block connectors
*If connected to two PoE-capable switches, only one of the ports will negotiate PoE; hence this is not a good solution for 
power redundancy (switch failure might lead to a reboot). Instead a “dumb” PoE injector (spare-pair power) should be used 
for the two Ethernet ports or a local 24 VDC local power backup. 
**If used together with PoE the station can be powered by 24 VDC as a local power backup.
  • When the TKIE-2 is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.

TFIE Connections.PNG


P1&P2 RJ45 PoE port for 10/100 Mbit Ethernet connection.

The station can be powered from this port if the line supports Power over Ethernet (PoE).
RJ45 PoE port


P3 Secondary Power; 24-48VDC

P4 10-pin plug-on terminal for external connections.

Pin 1 5.3V
Pin 2 GND
Pin 3 Button Input or LED Driver
Pin 4 Button Input or LED Driver
Pin 5 Button Input or LED Driver
Pin 6 Button Input or LED Driver
Pin 7 Button Input or LED Driver
Pin 8 Button Input or LED Driver
Pin 9 600 ohm balanced line out +
Pin 10 600 ohm balanced line out -1

P5 6-pin plug-on terminal for external connections.

Pin 1 COM relay 1
Pin 2 NO relay 1
Pin 3 NC relay 1
Pin 4 COM relay 2
Pin 5 NO relay 2
Pin 6 NC relay 2
Note.PNG Relay 1 is configured as output 7, and Relay 2 is configured as output 8!

P6 Loudspeaker & Electret microphone

Pin 1 10W Speaker amplifier +
Pin 2 10W Speaker amplifier -
Pin 3 Electret Microphone +
Pin 4 Electret Microphone -

J2 Turbine Relay Module - TA-10

Note.PNG Relay 3 is configured as output 9, and Relay 4 is configured as output 10!

J8 Headset/Handset connector

Pin 1 Offhook
Pin 2 GND
Pin 3 PTT
Pin 4 Handset Mic Positive
Pin 5 Handset Mic Negative
Pin 6 Headphone Positive
Pin 7 Headphone Negative
Pin 8 Line In Positive
Pin 9 Line In Negative


Restore Factory Defaults

See article: Restore Factory Default

Dimensions

ECPIR-P dimensions


Accessories

TA-10.jpg
TA-10

Additional Documentation

For more documentation, please visit the Zenitel web page: https://www.zenitel.com/product/tkie-2

Availability

This device is supported from Exigo 1.3 and newer.