VS-IMT Upgrade
This article describes how to upgrade the software on Exigo devices to the latest version via the VS-IMT tool.
All Turbine based Exigo devices use the same software image:
- Access Panels
- Amplifiers
- System Controller (SSC)
- TKIE/TKIS kits
- IP Speakers
Note that there is a separate upgrade procedure for the CRM-V IP Flush Master Station.
Note: Before you start configure the Exigo system it is important that all devices have been updated to the latest software/firmware.
Use only software/firmware from the same Exigo package.
Prerequisites
- Download and install the VS-IMT tool
- Download the latest Exigo firmware/software package and unzip the folder (do not unzip the vsft-PA.x.x.x.x file).
Run the station wizard and perform the discovery and the identify process. The next step in the wizard will then be the upgrade section.
Adding image files to library
Available Turbine images can be seen from drop-down menu of the same name. Adding additional images to the list can be performed with "Import image..." function.
Click on the button and navigate to .zip image previously downloaded from Zenitel site. This is recommended way to add software images.
Manually adding software images
See the VS-IMT Troubleshooting article.
Availability
This function is available from Exigo 1.3.3 and newer. VS-IMT must be version 1.4.2.4 or newer.
