Upgrade TKIS-2 from version 3.0.x.x

From exigoWiki
Revision as of 11:31, 10 February 2017 by Gsorensen (talk | contribs)
Jump to navigation Jump to search
TKIS-2.
TKIS-2

This article describes the upgrade procedure for TKIS-2 kits with version 3.0.x.x.
The TKIS-2 is used as standalone and inside the IP speakers ELSII-10H and ELSIR-10C.
Upgrading from version 3.0.x.x requires a special procedure.

Upgrade using the Web Interface of the station

Prerequisites

  1. A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html.
  2. Download the software package tsi-3.0.3.5.zip, and unzip the package and store the files in a folder on your PC.
  3. Download the software package sti-prod-4.2.3.14.zip, and unzip the package and store the files in a different folder on your PC.
  4. Check if your local firewall is not blocking incoming ping/ICMP (Turbine station is pinging TFTP Server during update process)

Upgrade procedure

The upgrade is a three-step process:

  • First upgrade from version 3.0.x.x to 3.0.3.5
  • Then upgrade from 3.0.3.5 to 4.2.3.14 (using sti-prod-4.2.3.14.zip)
  • Finally upgrade to exi-4.2.3.13

1. Start the TFTP server program and click Browse, and select the folder where the version 3.0.3.5 software files are located

File:TFTP 3035.PNG
TFTP Server - Browse to the folder where the software files are located


2. Log on to the Turbine Station web interface. Default login credentials are admin and alphaadmin. Select Station Administration > Manual Upgrade

3. Enter the IP address of the TFTP server (I.e. the IP address of your PC)

4. Enter the image file: tsi-3.0.3.5, and click Save settings

File:TurbineTo 3035.PNG
Load tsi-3.0.3.5 via the station web interface


The station will now contact the TFTP server and download the files. The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the Log viewer tab in the TFTP server program.


When the station is up and running again, the next step is to install version 4.2.3.14:

5. In the TFTP server program, Browse to the folder where the version 4.2.3.14 software files are located

6. In the Turbine web interface enter the image file: tsi2sti-4.2.3.14.ipk, and Save settings

File:TurbineTo 42314.PNG
Installing tsi2sti-4.2.3.14.ipk via the station web interface


The station will again contact the TFTP server and download and install the required files.

Upgrade from version 3.1, 4.0, 4.1

For upgrade from version 3.1, 4.0, 4.1 see article: Upgrade Turbine stations from 3.1, 4.0 or 4.1

Troubleshooting

In the case the upgrade is not successful it may be due to a windows setting.

Retrieved from "https://exigo.zenitel.com/w/index.php?title=Upgrade_TKIS-2_from_version_3.0.x.x&oldid=8738"