Difference between revisions of "Turbine to PC physical connection"

From exigoWiki
Jump to navigation Jump to search
(→‎Connecting the PC to the Turbine device)
 
(10 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
This article describes how to make a USB to serial cable.  
 
This article describes how to make a USB to serial cable.  
−
With this cable it is possible to connect direct to Turbine units. This is useful when you have a unit that is bricked.
+
With this cable it is possible to connect a PC direct to Turbine units. This is useful when you have a Turbine unit that is bricked.
 
   
 
   
 
== Preparing the cable for PC-Turbine serial connection ==
 
== Preparing the cable for PC-Turbine serial connection ==
Line 8: Line 8:
  
 
The original cable looks like this:
 
The original cable looks like this:
−
[[File:PC turbine cable 1.jpg|thumb|left|500px|Original USB cable]]
+
[[File:PC turbine cable 1.jpg|thumb|left|400px|Original USB cable]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
 
When the modification is done it should look like this:
 
When the modification is done it should look like this:
−
[[File:PC turbine cable 2.jpg|thumb|left|500px|Modified USB cable]]
+
[[File:PC turbine cable 2.jpg|thumb|left|400px|Modified USB cable]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
Line 19: Line 19:
  
 
First remove the metal connectors from the plastic casing. This is done by lifting the small plastic clip and then pulling the wire:
 
First remove the metal connectors from the plastic casing. This is done by lifting the small plastic clip and then pulling the wire:
−
[[File:PC turbine cable 3.jpg|thumb|left|500px|Remove the metal connectors]]
+
[[File:PC turbine cable 3.jpg|thumb|left|400px|Remove the metal connectors]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
 
All the metal connectors must be removed:
 
All the metal connectors must be removed:
−
[[File:PC turbine cable 4.jpg|thumb|left|500px|Remove the metal connectors]]
+
[[File:PC turbine cable 4.jpg|thumb|left|400px|Remove the metal connectors]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
 
When all the connectors are removed the cable should look like this:
 
When all the connectors are removed the cable should look like this:
−
[[File:PC turbine cable 5.jpg|thumb|left|500px|All metal connectors removed]]
+
[[File:PC turbine cable 5.jpg|thumb|left|400px|All metal connectors removed]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
 
When all cables are removed they must be inserted in the new plastic casing. <br>
 
When all cables are removed they must be inserted in the new plastic casing. <br>
 
When this is done the cable should look like this:
 
When this is done the cable should look like this:
−
[[File:PC turbine cable 6.jpg|thumb|left|500px|The modified cable in the new plastic casing]]
+
[[File:PC turbine cable 6.jpg|thumb|left|400px|The modified cable in the new plastic casing]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
 
=== Strap Cable ===
 
=== Strap Cable ===
 
A second cable is also needed witch is used as a strap between Turbine GPIO pinns:
 
A second cable is also needed witch is used as a strap between Turbine GPIO pinns:
−
[[File:PC turbine cable 7.jpg|thumb|left|500px|The modified cable in the new plastic casing]]
+
[[File:PC turbine cable 7.jpg|thumb|left|400px|The modified cable in the new plastic casing]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
Line 43: Line 43:
  
 
== Connecting the PC to the Turbine device ==
 
== Connecting the PC to the Turbine device ==
−
 
 
The new cable layout:
 
The new cable layout:
 +
{| class="wikitable"
 +
!colspan="6"|3-PIN connector
 +
|-
 +
|BLACK
 +
|GND
 +
|-
 +
|ORANGE
 +
|TXD
 +
|-
 +
|YELLOW
 +
|RXD
 +
|}
  
−
 
+
{| class="wikitable"
 +
!colspan="6"|6-PIN connector
 +
|-
 +
|&nbsp;
 +
|&nbsp;
 +
|-
 +
|BROWN
 +
|CTS#
 +
|-
 +
|RED
 +
|VCC
 +
|-
 +
|&nbsp;
 +
|&nbsp;
 +
|-
 +
|&nbsp;
 +
|&nbsp;
 +
|-
 +
|GREEN
 +
|RTS#
 +
|}
  
 
GPIO pinout for the Turbine:
 
GPIO pinout for the Turbine:
−
[[File:PC turbine cable 8.jpg|thumb|left|500px|GPIO pinout for the Turbine device]]
+
[[File:PC turbine cable 8.jpg|thumb|left|400px|GPIO pinout for the Turbine device]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
 
Connecting the cable:
 
Connecting the cable:
−
[[File:PC turbine cable 9.jpg|thumb|left|500px|Connecting the cable to the Turbine device]]
+
[[File:PC turbine cable 9.jpg|thumb|left|400px|Connecting the cable to the Turbine device]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
−
[[File:PC turbine cable 10.jpg|thumb|left|500px|Connecting the cable to the Turbine device]]
+
[[File:PC turbine cable 10.jpg|thumb|left|400px|Connecting the cable to the Turbine device]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
Line 62: Line 93:
 
The strap cable needs to be connected like this:
 
The strap cable needs to be connected like this:
  
−
[[File:PC turbine cable 11.jpg|thumb|left|500px|Strap cable connection]]
+
[[File:PC turbine cable 11.jpg|thumb|left|400px|Strap cable connection]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
−
[[File:PC turbine cable 12.jpg|thumb|left|500px|Strap cable connection]]
+
[[File:PC turbine cable 12.jpg|thumb|left|400px|Strap cable connection]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
−
 
  
 
== The PC Turbine cable connection overview ==
 
== The PC Turbine cable connection overview ==
Line 74: Line 104:
 
[[File:PC turbine cable 13.jpg|thumb|left|500px|PC Turbine connection overview]]
 
[[File:PC turbine cable 13.jpg|thumb|left|500px|PC Turbine connection overview]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
−
 
  
 
[[Category:Troubleshooting]]
 
[[Category:Troubleshooting]]

Latest revision as of 11:51, 8 May 2018

This article describes how to make a USB to serial cable. With this cable it is possible to connect a PC direct to Turbine units. This is useful when you have a Turbine unit that is bricked.

Preparing the cable for PC-Turbine serial connection

To connect the Turbine with the PC we have to modify the serial to USB cable. In addition you must also make a strap cable.

The cable that we will use can be found here.

The original cable looks like this:

Original USB cable


When the modification is done it should look like this:

Modified USB cable


Modifying the cable

There is no soldering or crimping required for this process.

First remove the metal connectors from the plastic casing. This is done by lifting the small plastic clip and then pulling the wire:

Remove the metal connectors


All the metal connectors must be removed:

Remove the metal connectors


When all the connectors are removed the cable should look like this:

All metal connectors removed


When all cables are removed they must be inserted in the new plastic casing.
When this is done the cable should look like this:

The modified cable in the new plastic casing


Strap Cable

A second cable is also needed witch is used as a strap between Turbine GPIO pinns:

The modified cable in the new plastic casing


That concludes the process of cable creation. You now have a cable kit that makes it possible to connect the PC to a Turbine device.

Connecting the PC to the Turbine device

The new cable layout:

3-PIN connector
BLACK GND
ORANGE TXD
YELLOW RXD
6-PIN connector
   
BROWN CTS#
RED VCC
   
   
GREEN RTS#

GPIO pinout for the Turbine:

GPIO pinout for the Turbine device


Connecting the cable:

Connecting the cable to the Turbine device


Connecting the cable to the Turbine device


Connecting the strap cable

The strap cable needs to be connected like this:

Strap cable connection


Strap cable connection


The PC Turbine cable connection overview

This is the overview of the connetion between the PC and the Turbine device:

PC Turbine connection overview


Retrieved from "https://exigo.zenitel.com/w/index.php?title=Turbine_to_PC_physical_connection&oldid=14435"