Difference between revisions of "TKIS-2"
Jump to navigation
Jump to search
(→Additional documentation) |
(→TKIS-2 Overview) |
||
| (19 intermediate revisions by the same user not shown) | |||
| Line 13: | Line 13: | ||
* Remote software upgrade, configuration and monitoring | * Remote software upgrade, configuration and monitoring | ||
* Powered from the IP network cable using Power over Ethernet (PoE) | * Powered from the IP network cable using Power over Ethernet (PoE) | ||
| − | * Advanced audio technology like automatic gain and volume adjustment, background noise cancellation, open duplex, etc. | + | * Advanced audio technology like automatic gain and volume adjustment, background noise cancellation, open duplex, etc.<br> |
| − | == | + | == TKIS-2 Overview == |
| − | + | [[File:TKIS 2 overwiev 1.png|left|600px]] | |
| + | <br style="clear:both;" /> | ||
| + | |||
| + | [[File:TKIS 2 overwiev 2.png|left|550px]] | ||
| + | <br style="clear:both;" /> | ||
| + | {| border="1" | ||
| + | | align="center" style="background:#ffd400;" width="50pt"| 1 || align="left" | Power/Relay Inputs || align="left"| Programmable relay. Max: 250VAC/220VDC, 2A, 60W | ||
| + | |- | ||
| + | | align="center" style="background:#ffd400;" width="50pt"| 2 || align="left" | I/O interface || align="left"| Interface for control inputs, control outputs and analog audio | ||
| + | |- | ||
| + | | align="center" style="background:#ffd400;" width="50pt"| 3 || align="left" | External Audio || align="left"| Connection for microphone and optional external loudspeaker | ||
| + | |- | ||
| + | | align="center" style="background:#ffd400;" width="50pt"| 4 || align="left" | Ethernet Port || align="left"| Ethernet connection with Power over Ethernet | ||
| + | |- | ||
| + | | align="center" style="background:#ffd400;" width="50pt"| 5 || align="left" | DIN mounting clips || align="left"| Plastic clips for mounting the TKIS-2 to a DIN rail | ||
| + | |- | ||
| + | |} | ||
| + | <br> | ||
| − | ==Software Upgrade== | + | == Software Upgrade == |
See article: [[Exigo Devices Upgrade]] | See article: [[Exigo Devices Upgrade]] | ||
| − | ==Connections== | + | == Connections == |
[[File:TCIS Connections 1.PNG|thumb|left|400px|TKIS-2 - Connections]] | [[File:TCIS Connections 1.PNG|thumb|left|400px|TKIS-2 - Connections]] | ||
| Line 40: | Line 57: | ||
|} | |} | ||
| − | + | {{Note}} Use cables crimped with ferrules for terminal block connectors | |
* When the TKIS-2 is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned. | * When the TKIS-2 is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned. | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | ===PCB - Front=== | + | === PCB - Front === |
[[File:TCIS Connections 3.PNG|800px]] | [[File:TCIS Connections 3.PNG|800px]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| Line 61: | Line 78: | ||
:Pin 5 NC relay | :Pin 5 NC relay | ||
| − | The relay can switch and carry continously 60W power maximum. | + | {{Note}} The relay can switch and carry continously 60W power maximum. |
| − | + | So with maximum current 2A, it can take maximum 30V, or with maximum voltage 250VAC it can take maximum 240mA. | |
[[File:TCIS Connections 5.PNG|thumb|left|500px|'''P2''' - 5-pin plug-on terminal for external connection]] | [[File:TCIS Connections 5.PNG|thumb|left|500px|'''P2''' - 5-pin plug-on terminal for external connection]] | ||
| Line 76: | Line 93: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | =Input Connectors= | + | === Input Connectors === |
'''P3''' 10-pin plug-on terminal for external connections. | '''P3''' 10-pin plug-on terminal for external connections. | ||
| Line 93: | Line 110: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | =Output Connectors + 1 relay= | + | === Output Connectors + 1 relay === |
[[File:TCIS Connections 12.PNG|thumb|left|500px|Connecting to the on-board relay. Extra LED controlled by output 1]] | [[File:TCIS Connections 12.PNG|thumb|left|500px|Connecting to the on-board relay. Extra LED controlled by output 1]] | ||
| Line 106: | Line 123: | ||
The 5,3V output can deliver 200mA current maximum | The 5,3V output can deliver 200mA current maximum | ||
| − | =PCB - Rear= | + | == PCB - Rear == |
[[File:TCIS Connections 8.PNG|800px]] | [[File:TCIS Connections 8.PNG|800px]] | ||
| Line 125: | Line 142: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| + | == Restore Factory Defaults == | ||
| + | See article: [https://wiki.zenitel.com/wiki/TKIS_Restore_Factory_Defaults Restore Factory Default] | ||
| + | |||
| + | == Dimensions == | ||
| + | [[File:TKIS-2 dimensions.PNG|left|700px|TKIS-2 dimensions]] | ||
| + | <br style="clear:both;" /> | ||
| + | == Additional Documentation == | ||
| + | For more documentation, please visit the Zenitel web page: https://www.zenitel.com/product/tkis-2 | ||
[[Category:Hardware]] | [[Category:Hardware]] | ||
[[Category:Kits]] | [[Category:Kits]] | ||
Latest revision as of 15:34, 31 January 2019
Voip Intercom Module
The Vingtor-Stentofon VoIP Intercom Module utilizes the latest technology to create unparalleled audio quality. Some of the many features include: HD voice quality, Open Duplex, Active Noise Cancellation, Automatic Volume Adjustment, MEMS microphone support, and a 10W Class D amplifier. These features, in conjunction with Vingtor-Stentofon's 70years of experience with acoustic technology are only a few of the many factors that make our audio quality second to none.
With this kit you can:
- Build your own IP Intercom station or help point
- Vingtor-Stentofon Audio Presence - crystal clear audio
- Make your own 10W IP Speaker
- Control relay and I/Os over IP
- Supports a wide set of IP networking standards
- DIN-rail mountable, clips included
- Remote software upgrade, configuration and monitoring
- Powered from the IP network cable using Power over Ethernet (PoE)
- Advanced audio technology like automatic gain and volume adjustment, background noise cancellation, open duplex, etc.
Contents
TKIS-2 Overview
| 1 | Power/Relay Inputs | Programmable relay. Max: 250VAC/220VDC, 2A, 60W |
| 2 | I/O interface | Interface for control inputs, control outputs and analog audio |
| 3 | External Audio | Connection for microphone and optional external loudspeaker |
| 4 | Ethernet Port | Ethernet connection with Power over Ethernet |
| 5 | DIN mounting clips | Plastic clips for mounting the TKIS-2 to a DIN rail |
Software Upgrade
See article: Exigo Devices Upgrade
Connections
The TKIS-2 has an RJ-45 PoE/LAN port, and 6-pin & 10-pin external connectors.
| Ethernet/Power | 10/100 Mbps Ethernet RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line. |
| Secondary Power | 24 VDC (16 – 48 V) secondary power is provided from an external adapter. |
| Relays | There is one Double Throw relay contact with 60W switching power. COM, NO, NC contacts are provided. |
| Input/Output | 6 I/Os are available. Each I/O can be configured as either input, output, or LED driver. |
| Audio Line Out | A balanced 600 ohm audio line out with induction loop signal |
Use cables crimped with ferrules for terminal block connectors
- When the TKIS-2 is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.
PCB - Front
P1 RJ45 PoE port for 10/100 Mbit Ethernet connection.
- The station can be powered from this port if the line supports Power over Ethernet (PoE).
P2 5-pin plug-on terminal for external connections.
- Pin 1/2 24 VDC for external secondary power if PoE is not used. Pin 1 is positive.
- Pin 3 COM relay
- Pin 4 NO relay
- Pin 5 NC relay
The relay can switch and carry continously 60W power maximum.
So with maximum current 2A, it can take maximum 30V, or with maximum voltage 250VAC it can take maximum 240mA.
P4 Loudspeaker & Electret microphone
- Pin 1 10W Speaker amplifier +
- Pin 2 10W Speaker amplifier -
- Pin 3 Electret Microphone +
- Pin 4 Electret Microphone -
Input Connectors
P3 10-pin plug-on terminal for external connections.
- Pin 1 5.3V (max. 200mA current)
- Pin 2 GND
- Pin 3 Button Input or LED Driver
- Pin 4 Button Input or LED Driver
- Pin 5 Button Input or LED Driver
- Pin 6 Button Input or LED Driver
- Pin 7 Button Input or LED Driver
- Pin 8 Button Input or LED Driver
- Pin 9 600 ohm balanced line out +
- Pin 10 600 ohm balanced line out -
Output Connectors + 1 relay
The extra relay for any of the 6 I/O pins is connected as shown:
Most general purpose P-Channel MOSFET's should work. Recommended example: BSS84
The 5,3V output can deliver 200mA current maximum
PCB - Rear
J6 10-pin terminal for digital MEMS Microphone
- Pin 1 Left mic select (Vdd)
- Pin 2 Right mic select (GND)
- Pin 3 Data
- Pin 4 Data
- Pin 5 Vdd 3.3V
- Pin 6 Vdd 3.3V
- Pin 7 CLK
- Pin 8 CLK
- Pin 9 GND
- Pin 10 GND
Restore Factory Defaults
See article: Restore Factory Default
Dimensions
Additional Documentation
For more documentation, please visit the Zenitel web page: https://www.zenitel.com/product/tkis-2
