Difference between revisions of "System Downgrade"
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
# Download the latest 1.2 software package | # Download the latest 1.2 software package | ||
| − | === | + | ===AMC-IP=== |
| − | + | * Open the VS-AlphaCComXEImageUpgrade and select "Select Image File". | |
| + | * Navigate to "... Vingtor Stentofon\VS-Tools\AlphaComImages" | ||
| + | * Select "axeu_b3001_a1101303.aimg" | ||
| + | |||
| + | If server status says: "Could not start HTTP server", a TFTP-server is needed to transfer the image to the AMC-IP. | ||
| + | Load a tftp-server and set the root folder to:"... \Vingtor Stentofon\VS-Tools\HttpFileServerRoot". | ||
| + | |||
| + | * Write the IP of the AMC-IP that will be flashed --> Connect to target | ||
| + | * If the status window shows: "Bootloader Status Recived - Status OK", everything is ready --> Press "Start Image Upgrade" | ||
Revision as of 11:06, 14 March 2017
This article describes how to downgrade an Exigo system between major releases.
Downgrade 1.3 to 1.2
Prerequisites
- Download and install the VS-AlphaCComXEImageUpgrade
- Download the latest 1.2 software package
AMC-IP
- Open the VS-AlphaCComXEImageUpgrade and select "Select Image File".
- Navigate to "... Vingtor Stentofon\VS-Tools\AlphaComImages"
- Select "axeu_b3001_a1101303.aimg"
If server status says: "Could not start HTTP server", a TFTP-server is needed to transfer the image to the AMC-IP. Load a tftp-server and set the root folder to:"... \Vingtor Stentofon\VS-Tools\HttpFileServerRoot".
- Write the IP of the AMC-IP that will be flashed --> Connect to target
- If the status window shows: "Bootloader Status Recived - Status OK", everything is ready --> Press "Start Image Upgrade"
