Difference between revisions of "Start alarm from AlphaCom in Exigo A-B system"
Jump to navigation
Jump to search
(→AlphaPro Configuration) |
|||
Line 7: | Line 7: | ||
== AlphaPro Configuration == | == AlphaPro Configuration == | ||
* Set up the redundant AlphaCom integration following [[Redundant AlphaCom integration | this guide]]. <br> | * Set up the redundant AlphaCom integration following [[Redundant AlphaCom integration | this guide]]. <br> | ||
− | * Set up 2 different | + | * Set up 2 different DirNo numbers (for example 98001 and 98002) as SIP stations related to PSC A and PSC B trunk: |
=== 98001 Setup: === | === 98001 Setup: === |
Revision as of 13:48, 28 May 2018
This article explains how to start alarm from AlphaCom on a Exigo A-B system.
Guide on how to set up the redundant AlphaCom integration can be found here.
Starting an alarm from AlphaCom to a redundant Exigo system is done by starting a group call in AlphaCom that starts the Alarm generator in both Exigo A and B controller.
AlphaPro Configuration
- Set up the redundant AlphaCom integration following this guide.
- Set up 2 different DirNo numbers (for example 98001 and 98002) as SIP stations related to PSC A and PSC B trunk:
98001 Setup:
Notice the related to trunk.
98002 Setup:
Notice the related to trunk.
- Make a group and add both dir numbers (98001 and 98002) to the group to be able to call both at the same time from a station:
- Add both dir numbers (98001 and 98002) to the group:
- Now program a DAK to call that group – in this case dir 85 – and this will start the alarm in both Exigo A and B.
EMT Configuration
- Configure 2 identical Action Calls with different directory numbers (for example 98001 and 98002).