Difference between revisions of "Secondary System Controller Update"
Jump to navigation
Jump to search
Line 1: | Line 1: | ||
+ | [[File:System_controller_block_diagram.JPG|thumb|right|350px|System Controller Simplified Block Diagram]] | ||
+ | |||
The '''Exigo System Controller''' consist of two main components: | The '''Exigo System Controller''' consist of two main components: | ||
* Primary System Controller, PSC | * Primary System Controller, PSC |
Revision as of 13:54, 29 June 2016
The Exigo System Controller consist of two main components:
- Primary System Controller, PSC
- Secondary System Controller, SSC
This article describes how to upgrade the software on the Secondary System Controller part of the Exigo System Controller.
Upgrade using the Web Interface
Prerequisites
- A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html
- Download the latest Exigo firmware/software package and unzip the folder.
- Check if your local firewall is not blocking incoming ping/ICMP (Turbine station is pinging TFTP Server during update process).
Upgrade procedure
- Start the TFTP server program and click Browse, and select the folder where the latest version of exi-x.x.x.x software files are located
- Log on to the Station web interface. Default login credentials are admin and alphaadmin. Select Station Administration > Manual Upgrade
- Enter the IP address of the TFTP server (I.e. the IP address of your PC)
- Enter the image file: exi-x.x.x.x, and click Save settings
The station will now contact the TFTP server and download the files. The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the Log viewer tab in the TFTP server program.